OK, I just received a set of these that I purchased on Ebay, but there was no instructions. need some help on installing them. It came with 8 self tapping screws and 4 threaded screws with rubber "O" rings and self locking nuts. Obviously the foot rest uses self tapping screws but which pedal gets the self tapping screws and which gets the threaded screws with nuts? Does the rubber brake pedal pad remain on the pedal or is it removed? Don't want to screw it up.
06-14-13, 08:18 PM
06-15-13, 10:26 AM
Originally Posted by phunter1
I used the nuts & bolts on the brake pedal & self tapping on gas pedal. Not sure what the o rings are for ? No instructions either.
06-15-13, 10:41 AM
To the foot rest i got 4 self tapping screws.
Then I got 4 bolts 15 mm long and 2 bolts 22 mm long.
And 6 nuts.
There is 4 holes in the foot rest, 3 holes in the brake peadal and 3 holes in the gas pedal.
I will give it a try next week.
06-15-13, 12:08 PM
Thanks guys. Sounds like the screw and bolt packaging is pretty variable. I only have one length of bolt and only 4 of them. I will use the bolts on the brake pedal, since that is the most important pedal for safety.
09-04-13, 10:45 AM
I just ordered this pedal set also from on EBAY (with the letters) I'm. not sure how they screw on though, I read somewhere drilling was required?