- 10-07-13 04:13 PM #1Cadillac Owners Member
- Automobile(s): 2006 SRX 3.6L V6
- Join Date
- Dec 2011
Is there a Haynes Manual for the 2006 SRX? I searched their website and couldn't find one. I need to replace a friend's water pump and need it for guidance. If there isn't one for the 2006 SRX, is there a similar model that I can reference for guidance?
- 10-07-13 05:12 PM #2
Re: Haynes Manual?
6 or 8? PM me your email and I'll send a PDF from GM service manual.__________________________________________________ ________________
This site is too much fun to not be a supporter
Been fixin' cars for 74 years
Some of what I know comes from experience, some from reading or listening,-most of it, I just make up
- 10-07-13 05:36 PM #3
Haynes/Chiltons manuals are way too basic for most modern cars. Get yourself a "real" Helm FSM.
- 10-07-13 07:56 PM #4Cadillac Owners Enthusiast
- Join Date
- Oct 2012
I've replaced my v6 water pump twice already and took less than 30 mins start to finish. Take the strut brace and engine cover off I took the throttle body off for more clearance also the intake tube. 4 bolts hood the pulley on then move the tensioner to slide the belt off and I think 6 or 8 10mm bolts for the pump. Really quick job considering its a Cadillac. No special tools needed.
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - Stubby Hex Bits Socket Set
Stubby Hex Bits Socket Set - 9 Piece; 1/4" & 3/8" Drive; Metric Stubby Hex Bit Socket Set; Contains: 1/4" Drive: 6mm, 7mm, 8mm & 10mm, 3/8" Drive: 12mm, 14mm, 17mm, 18mm & 19mm
- PowerTorque Tools - Pliers
Pliers - 5 Inch; LockMore on PowerTorque Tools - Pliers
- PowerTorque Tools - Crowfoot Wrenches
Crowfoot Wrenches - 9 Pcs 3/8" Dr Crowfoot Wrench Set - Metric