Hi there!

I'm Kelly, the owner of Ghostwheel Technologies Fuel Injection, outside of Denver Colorado. We do mostly street rods, some electronics and a LOT of Caddy parts. I'm really looking forward to supporting the community and maybe selling a part or two. :)

I'm really big into the B-body community (Impala and Caprices) and the D-bodies (Fleetwoods, 1993 - 1996) since so many of their parts compliment eachother. Please check us out http://www.ghostwheeltech.net and I can help you please IM or email me. Thanks!

Hey. Would you by any chance - and I know this is a long-shot - have the rear Cadillac emblem (around the trunk key) and a "Cadillac" ensignia for the rear trunk?

Hey. Would you by any chance - and I know this is a long-shot - have the rear Cadillac emblem (around the trunk key) and a "Cadillac" ensignia for the rear trunk? For your FW? Yeah, I'm pretty certain I've got a good emblem on a bad trunk. I can check it Monday when I'm back in the office.

Hmm... Old Caddy parts. Any '68s with disk brakes? :yup:

For your FW? Yeah, I'm pretty certain I've got a good emblem on a bad trunk. I can check it Monday when I'm back in the office.
Yup, that's what I need.. It's two parts, actually. The "Cadillac" ensignia - and the big piece that goes around the trunk lock.. Not the wreath - the center part that sticks out.. Kinda hard to describe it.. If you need me to send you a picture, I'll Photoshop something up...

Yup, that's what I need.. It's two parts, actually. The "Cadillac" ensignia - and the big piece that goes around the trunk lock.. Not the wreath - the center part that sticks out.. Kinda hard to describe it.. If you need me to send you a picture, I'll Photoshop something up...
I'm pretty sure I know what you're refering to. If you'd like to send a pic it can't hurt tho.

Thanks!

Hmm... Old Caddy parts. Any '68s with disk brakes? :yup:
LOL I think I have a disc changeover off of a 1970 that will work for you. Spindles, calipes, rotors, brake lines, etc. 250.00 plus shipping. I'll have to see if its all there Monday.

Giving praise to you kelley for fast call back.
Hoping to do business with,
will post my experience as time goes on

DVD nav system off a cts???

DVD nav system off a cts???
Nope. Sorry.

Personally I keep hoping to get a DeVille with night vision in. LOL I'm going to put it in my truck. :tongue2:

Did you check the deville yet? I would need the proportioning valve and the master cylinder too.

Did you check the deville yet? I would need the proportioning valve and the master cylinder too.
Well I've got a 69 disc front. But it would mean swapping the up and lower control arms because of the ball joint size. For the disc swap you'll also need the master cyl, prop. valve, and booster. So its 250 for the brakes and control arms, and 115 for the rest of it. I could do 335.00 for everything shipped.

Hi there!

I'm Kelly, the owner of Ghostwheel Technologies Fuel Injection, outside of Denver Colorado. We do mostly street rods, some electronics and a LOT of Caddy parts. I'm really looking forward to supporting the community and maybe selling a part or two. :)

I'm really big into the B-body community (Impala and Caprices) and the D-bodies (Fleetwoods, 1993 - 1996) since so many of their parts compliment eachother. Please check us out http://www.ghostwheeltech.net and I can help you please IM or email me. Thanks! Maybe you have these, or can point me to someone who does, I've been looking for a while. I need the chrome trim strips that wrap around the top of the front bumper on a 92 Eldorado. I don't really want to order from the dealer.
Thanks
Bob

Can u keep me posted whenever u get a cts-v in?

Do you got the chrome molding above the armrest on the driver side of an '84 Fleetwood Brougham Coupe? There are 2 verticle moldings on there.

Can u keep me posted whenever u get a cts-v in?
If I ever get a CTS-V in, you can bet it'll be in my shop either for rebuilding or I'll keep every part I possibly can off of it. LOL

Maybe you have these, or can point me to someone who does, I've been looking for a while. I need the chrome trim strips that wrap around the top of the front bumper on a 92 Eldorado. I don't really want to order from the dealer.
I can sell the left or right, but I am in chronic shortage of the centers. The side peices are 30.00 each shipped.

Do you got the chrome molding above the armrest on the driver side of an '84 Fleetwood Brougham Coupe? There are 2 verticle moldings on there. I do have them, they are 60.00 shipped.

Do you have the chrome lettering off the side of a 99-00 Escalade that says "Cadillac"? Also I have a '93 Sixty Special with "light beige" or "neutral beige" interior color and my driver's side front door panel is dying! Thanx,
Jacob Hoppe