The casting outfit that has been hosing Diff Tech has come thru with the part. We should have a pic of the actual housing in situ, in a day or two!

Marty - Thanks for the update - Keep us posted. :worship:

GT

Sounds good!!!

excellent news! Cant wait to see the finished product.

F

i was thinking about our investment the other day. thanks for the update.;)

Good news, I'm glad to hear that things are progressing. At one point there were 3 outfits developing custom rears, but it seems that all are in haitus.

My diff is still intact, but I'm going to to buy one of these diff kits as insurance. I'm in this game for the long haul.

Thanks for keeping us up with the development news.

:yeah: Im in the same boat....


F

Yep this is what I am waiting for to put some drag radials on and launch this puppy off the line and see what she is really made of, 11's to start out would be fine, but ultimately will shoot for 10's is any of these rears are produced and can handle the launch. Now on motor 338 and 100shot 468rwhp. Would like to bump that to 550-600 in the future.

J

Yep this is what I am waiting for to put some drag radials on and launch this puppy off the line and see what she is really made of, 11's to start out would be fine, but ultimately will shoot for 10's is any of these rears are produced and can handle the launch. Now on motor 338 and 100shot 468rwhp. Would like to bump that to 550-600 in the future.

JHave fun with the wheelhop.

Have fun with the wheelhop.


and rear pop!


GT

Well, the lump is in place. It has to be carved a bit and properly fitted then it goes to casting. It bolts to the 3 mounts that exist.

i volunteer to dynamat the trunks of whomever buys this :p
if you buy me beer

Have these guys addressed the axle shafts.It looks as close as the mad mans offering.I'm guessing whoever is cheapest wins the work.I did read Parkers V only lacks a drive shaft now.Who's gonna get my money?

Have these guys addressed the axle shafts.It looks as close as the mad mans offering.I'm guessing whoever is cheapest wins the work.I did read Parkers V only lacks a drive shaft now.Who's gonna get my money?

yes of course we'll do that ! One thing at a time .........rome wasn't built in a day :) This will be a complete bolt in unit and a complete driveline package !


Kurt

You go Mate.....:highfive:

Have these guys addressed the axle shafts.It looks as close as the mad mans offering.I'm guessing whoever is cheapest wins the work.I did read Parkers V only lacks a drive shaft now.Who's gonna get my money?

This one will bolt in the stock location.....It will also permit the exhaust to pass thru although the drivers side will be tight. This unit is a bit smaller.

This is beginning to look interesting!!! You guys deserve lots of credit for getting this package together!! :worship: