: Specter Werks rear spoiler



Dick's06Vee
02-25-06, 07:30 PM
Has anyone bought one of their rear spoilers? If so are you happy with the quality? How many holes are required for mounting? Any issues with water getting trapped underneath once mounted? Thanks. Dick

Click here: http://www.spectergtr.com/images/ctsv_rear.jpg

SoCadillac
02-25-06, 07:37 PM
http://www.cadillacforums.com/forums/cadillac-cts-forum/66284-new-corsa-exhaust-rear-spoiler.html

517
02-25-06, 08:24 PM
That spoiler is sick! Really looks good. You should get one. :thumbsup: Cadillac should have put a decent one on the V.
Keep on truckin' Dick's06Vee! :burn:

Geno
02-25-06, 09:05 PM
Has anyone bought one of their rear spoilers? If so are you happy with the quality? How many holes are required for mounting? Any issues with water getting trapped underneath once mounted? Thanks. Dick

Click here: http://www.spectergtr.com/images/ctsv_rear.jpg

Install requires two small screw holes toward each end of the spoiler. These will not hold the spoiler in place by themselves. Use double sided tape for the adhesion.

The quality was real great, but not flawless. If you have it primed, sanded and painted, you will notice a wavy surface if observed from the outside edge. This can be worked out during the prepping by someone who knows what they are doing.

I had mine done by the dealer. I told them I did not care what it cost, I just wanted the best job. Their best did not meet my definition of best, due to the wavy surface (barely noticable, but there).

Staxxin
02-25-06, 10:43 PM
Dick,

I recently had mine installed and absolutely love it. The fitment and quality is superb. Take a look http://www.cadillacforums.com/forums/cadillac-cts-v-series-forum/65336-specter-spoiler-installed-today.html?highlight=specter+spoiler

I highly recommend it!!!!

SoCadillac
02-26-06, 02:53 AM
Here is the GM factory CTS spoiler:

http://www.cadillac.com/cadillacjsp/model/accessory.jsp?model=cts

Don't ask me why they do show it under the CTS-V accessories:

http://www.cadillac.com/cadillacjsp/model/accessory.jsp?model=ctsv

CVP33
02-26-06, 05:09 PM
Install requires two small screw holes toward each end of the spoiler. These will not hold the spoiler in place by themselves. Use double sided tape for the adhesion.

The quality was real great, but not flawless. If you have it primed, sanded and painted, you will notice a wavy surface if observed from the outside edge. This can be worked out during the prepping by someone who knows what they are doing.

I had mine done by the dealer. I told them I did not care what it cost, I just wanted the best job. Their best did not meet my definition of best, due to the wavy surface (barely noticable, but there).

Geno's looks flawless. He's just too damned picky. :thumbsup:

Geno
02-27-06, 10:32 AM
Geno's looks flawless. He's just too damned picky. :thumbsup:

Picky...that be me!

SBONES
02-27-06, 12:54 PM
i like mine....