Does anyone know where I can get a good deal on a UUC Short Shifter? I see it available on their site for $399 but I recall others stating they paid less. Any advice is greatly appreciated. THANKS!!!

399 is the price...they had an introductory sale when they first marketed the product, now its full price.


F

Thanks for the heads up!!!

Look at the B&M unit. It's a lot less money.:bouncy:

GreyFox -

How's the B&M for interior noise? For example, I heard the Katech was very noisey and a lot of people removed it and went the UUC path.

Any info you have the B&M, is greatly appreciated.

Thanks!!!!

GreyFox -

How's the B&M for interior noise? For example, I heard the Katech was very noisey and a lot of people removed it and went the UUC path.

Any info you have the B&M, is greatly appreciated.

Thanks!!!!

Staxxin

I have the B&M shifter. There was alot of interior noise initially. I put dynamat around the shifter and the connecting linkage and the vibration noise was reduced greatly. Can only hear it when the radio is off. I will say that after having the rearend replaced last week, my wife drove it and she says there in no more noise. Don't know if the dealer made any adjustments to the tranny to remove the rest of the noise. I do like the way it shifts. Firm, not too notchy.

Staxxin

Sorry for the butting in. I realize you were asking GF, but it thought I would give you my evaluation. Just my .02.

DeputyDog -

No apologies necessary. I appreciate your input. I have to admit that I am a bit concerned about the cabin noise. Is the UUC plagued with similar behavior?

DeputyDog -

No apologies necessary. I appreciate your input. I have to admit that I am a bit concerned about the cabin noise. Is the UUC plagued with similar behavior?
nope

Staxxin

Don't believe so. I have read some threads on here about why the UUC doesn't have cabin noise, but I can't remember where. Someone hear might be able to tell you where to find that thread.

had the Katech, tossed it....wayyyy too much noise. Have the UUC.....all is quiet on the North Coast front.

F

I paid the 295 for uuc shifter,I would do it again for 399 and never look back.

:banghead: Wish I had bought at 295. Say, why can't I see UUC's shifter for the V on their website?:hmm:

I have the B&M and had a similar experience as DeputyDog...after putting in the Dynomat around the shaft...all is good in the hood. :thumbsup:

I have a B&M and really like it. I was real nevous about the noise. Thought that would be all I would hear. Not a problem. Tight tolerances mean some noise is bound to be transmitted.The factory said to grease it up real good. I did. Instal was a pain. Not much room under there. $224 from Summit.Good luck.

:banghead: Wish I had bought at 295. Say, why can't I see UUC's shifter for the V on their website?:hmm:

Rand49er

Click on product catalog, go to cts-v products, then click on short shifter, should be a picture of the shifter. Hope this helps.