slow35th
04-02-05, 04:56 PM
Here is a fix for your rattling A/C vents. The vents rattle because of a weak spring that pushes the vent shutters together.
http://www.pbase.com/lancemoreland/image/41543823.jpg
Remove the vent that is rattling and open your favorite beverage (very important).
http://www.pbase.com/lancemoreland/image/41543824.jpg
Disassemble the vent by gently releasing the tabs around the vent.
http://www.pbase.com/lancemoreland/image/41543825.jpg
Remove the plastic bow/spring assembly from the center of the vent.
http://www.pbase.com/lancemoreland/image/41543826.jpg
Remove the factory spring from the plastic bow.
http://www.pbase.com/lancemoreland/image/41543828.jpg
Cut a heavy bobby pin slightly shorter than the factory spring and put slight bends on each end of the cut bobby pin as shown.
http://www.pbase.com/lancemoreland/image/41543827.jpg
Reassemble the bow and bobby pin as shown and put the vent back together. Your vents will be noticeably tighter and best of all will no longer rattle.
http://www.pbase.com/lancemoreland/image/41543829.jpg
http://www.pbase.com/lancemoreland/image/41543823.jpg
Remove the vent that is rattling and open your favorite beverage (very important).
http://www.pbase.com/lancemoreland/image/41543824.jpg
Disassemble the vent by gently releasing the tabs around the vent.
http://www.pbase.com/lancemoreland/image/41543825.jpg
Remove the plastic bow/spring assembly from the center of the vent.
http://www.pbase.com/lancemoreland/image/41543826.jpg
Remove the factory spring from the plastic bow.
http://www.pbase.com/lancemoreland/image/41543828.jpg
Cut a heavy bobby pin slightly shorter than the factory spring and put slight bends on each end of the cut bobby pin as shown.
http://www.pbase.com/lancemoreland/image/41543827.jpg
Reassemble the bow and bobby pin as shown and put the vent back together. Your vents will be noticeably tighter and best of all will no longer rattle.
http://www.pbase.com/lancemoreland/image/41543829.jpg