: Steering wheel mounted shift buttons



Mistercoffee2
07-13-13, 12:03 PM
Not sure this is the correct forum for shift buttons but a few months age I installed steering wheel mounted shift buttons on my 2008 CTS. Same buttons as GM uses. From the beginning I planned to do a DIY so I took photos. These write ups take a lot of time so I would like to get a feel for interest in a DIY. Cost <$100.

Should I do it?

arw1510
07-13-13, 04:32 PM
It sounds like you asking us if we want you to write up a diy thread on how to do it? am I reading that correctly?

dekes1
07-13-13, 07:52 PM
Yes please!

or, if you don't want to go through all the trouble of the write-up, a down-n-dirty summary (specifically the wiring connections you made) would be most appreciated.

Mistercoffee2
07-20-13, 03:37 PM
It sounds like you asking us if we want you to write up a diy thread on how to do it? am I reading that correctly?

That's correct.

Pops09
07-24-13, 03:15 PM
That's correct.

Yes please! Very interested here!

Mistercoffee2
07-24-13, 03:27 PM
Yes please! Very interested here!

That's 2? Not a large need for this MOD. I'll post it when I can get things together.

No more responses needed. This thread is dead.

OMG
07-26-13, 02:26 AM
I would love to see it!

Rerodz
09-09-13, 12:24 PM
PM sent.. sorry my inbox was full