: CNC ported intake snout, Does anyone sell one??

07-08-13, 07:13 PM
I know that there are a lot of people who hand port their intake blower snout to increase the air flow but I was wondering if anyone has a CNC program to do that?

I also wanted to know how much material can be safely taken out from the blower snout to increase flow? I was guessing around 1/8 inch from all surfaces.

V locity
07-10-13, 08:07 AM
You may want to contact LME in Houston.

07-10-13, 04:02 PM
V locity, Thanks for the reference. They certainly do and they also port the blowers as well claiming to get big power improvement in the process.

V locity
07-10-13, 06:58 PM
Yep! ;)

07-18-13, 01:49 PM
Do they CNC or hand port? Blowers and snout both?

I ask because when I just looked on their site they talk about hand porting heads...I didn't see anything about CNC porting and heads or anything other than blocks.
You need 5-axis to do heads and blowers.

OP- What is your time frame?