: Video of installed Timmyc heatexcanger



1madstsv
06-17-13, 10:17 PM
Showing the Timmyc heatexcanger installed on my v and sound clip of borla exhaust with cats gutted. Also showing the d3 heatexcanger that came off the car.


http://www.youtube.com/watch?v=ceiSQZ_qjwU&feature=youtube_gdata_player

SugsPa
06-17-13, 11:33 PM
Thanks for posting the video. You have a nice V, looks like you have a lot invested in it. Do you know what the HP and torque your V is pushing? Would like to do some HP things to my V when the warranty is up.


SugsPa

ChurchSTSV
06-18-13, 02:37 AM
Nice.

1madstsv
06-18-13, 01:51 PM
Thanks it's a very nice car but I did not have the work done. The first owner did former member. He sent the car from nj to ca to d3 too have the work done. Im just fixing what they messed up and adding my own tuch to the car. As for hp he told me it did 411rwhp I have yet to dyno it I only had it street tuned.

JB_V
06-18-13, 02:42 PM
Great car and thanks for posting. Have the heat exchanger and should be putting it in shortly.

1madstsv
06-19-13, 11:01 PM
Here is a video showing how cool the supercharger runs with a good heatexcanger. All tests that I did up to this were at least 30* hotter before Timmyc heatexcanger.

http://www.youtube.com/watch?v=0idH7nRrzHU&feature=youtube_gdata_player

TimmyC
06-20-13, 12:25 AM
Here is a video showing how cool the supercharger runs with a good heatexcanger. All tests that I did up to this were at least 30* hotter before Timmyc heatexcanger.

Thanks for posting the video. We need a link to the second one.

1madstsv
06-20-13, 07:31 AM
Fixed it.

youknooow
06-24-13, 11:25 AM
How did you discover your boost is bleeding off?

1madstsv
06-24-13, 01:40 PM
When tuning it with hp tuners we could see it was going to 11.5 psi witch is low and as rpm went Past 4800 it dropped to 9.5psi. Just don't know why. It still runs great I ran my old 06 on Saturday from 40-1**mph and had 1/2 car on him right from the start and gave him the hit

PGA2B
06-24-13, 11:01 PM
Give me a call. I have a suggestion.

1madstsv
06-24-13, 11:18 PM
I will but we tried every thing we could think of we even by passed the boost regulator. Russel had said some thing abought d3 messing up the cable under the blower and holding open the bypass. But I'm not going to pull the blower till the worked over one goes on our I take it off to put turbos on. You can call me any time tomorrow when you are free I will be up from 4am ect till 11pm.

theotherguyssn
07-01-13, 03:01 PM
anybody happen ot know how i get in touch to get one of timmy c's heat exchangers and have a couple ?'s about it thanks!!

AriGold.
07-01-13, 03:51 PM
Yeah, pm him. He will give you his number. He accepts PayPal.

theotherguyssn
07-01-13, 04:05 PM
k thanks yea tried to message him but his inbox is full dammit lol

TimmyC
07-01-13, 04:10 PM
T_coel@Yahoo.com for now.

TimmyC
07-01-13, 07:56 PM
Inbox cleaned out.