: ulleys



wiffehatesmyv
06-03-13, 10:07 PM
has anyone used the pulleys from smoothflow pulleys.com and if so how did you pull your stock pulley from the supercharger snout ?

Guy.Seminerio
06-03-13, 10:24 PM
http://www.cadillacforums.com/forums/cadillac-sts-v-series-forum/
That's the STS-V forum. You'll want to open a new thread there.

----------

http://www.cadillacforums.com/forums/cadillac-sts-v-series-forum/
That's the STS-V forum. You'll want to open a new thread there.

PGA2B
06-04-13, 08:37 PM
Mine was the one Nate used to build it. The pics you see on his site and his ebay auction are of my set up on my dryer!! Here is the original post.

http://www.cadillacforums.com/forums/cadillac-sts-v-series-forum/269283-got-my-snout-back-2-4-a.html

The easiest way is to unbolt the S/C and take of the snout. Be careful of the STINKY oil inside the snout. Put some towels under the S/C before you open the snout. You will need to rent the snout tool from either ZZP Performance or Tim (Don't know if he rents them) and the pulley puller. Pop off the stock pulley and turn down the snout. Replace the oil and bolt it back together.