: Cags eliminator not working

04-25-13, 07:23 AM
So I got a cags eliminator of eBay and it doesn't seem to be working. Anyone have this problem?

04-25-13, 07:48 AM
You may have installed on the wrong harness - there are two in the same vicinity.

04-25-13, 09:56 AM
I forget, aren't the two harnesses on opposite sides of the trans?

Either way darkman is correct, I believe the other plug is for the Reverse lockout solenoid, so until you get it figured out, be careful going into 5th gear to make sure you don't accidentally going into Reverse.

04-25-13, 10:16 PM
Oh I'll check that asap:banghead:


You know what maybe that's why my auto mirrors haven't been working. I assumed it was the plug( assumption is the mother of all f ups)

04-28-13, 05:24 PM
If you want to check and see if you plugged it into the reverse lockout harness, simply start in reverse, pop it into neutral after getting to about 10 mph, and see if you can get it back into R.

04-29-13, 07:46 AM
That's what it was ,I realized after you mentioned the reverse lock out that the curb assist stopped working around the same time. Thanks everyone