: replacing front turn signal bulbs with leds

03-28-13, 09:58 PM
Hey guys new to this site I bought a 2010 SRX and I'm replacing the front turn signal bulbs with LEDS. Can the bulbs be removed thru the wheel well instead of removing the whole bumper.

03-29-13, 10:53 AM
On the passenger side, maybe. Driver side, no.

04-02-13, 04:47 PM
Thank you

07-04-13, 05:38 PM
I was able to do it without removing the bumper for the driver side. You have to unclip the top part of the underhood fuse box (I'm not talking about the cover, the box splits in half, if you can find the clips). You will need to remove the engine compartment outer plastic overs and rubber molding. The fuse box does not come out, you just need to move it back an inch or so so your hand can get in there. Not for the faint of heart!

07-04-13, 09:13 PM
Very true. A friend with small hands comes in handy. I was barely able to get my hands in the DRL bulb spot on the 2010.