: Rohana RC10 Wheels



jcarlos
03-27-13, 02:23 PM
Does anybody have the RC10 wheels in 20x9 and 20x10 staggered on a sedan? They have respective offsets of +35 and +40.

I have phoned Rohana and they have told me that a 5mm spacer is required to clear the front brakes, and besides that, there is no other fitment issues.

A couple of wheel shops have phoned Rohana and they have been told that the rear also needs a spacer and that the wheels would stick out too much due to the more aggressive offsets.

I dont mind a moderate aggressive stance but I don't want it to look stupid, especially in the front.

Some sources: http://www.elementwheels.com/proddetail.asp?prod=ctsvrohanarc10&cat=3661

http://rohanawheels.com/wheels/rc10/

Thank you for your comments.

Stillborn
03-27-13, 07:32 PM
those look(blue cts-v in pic) like they belong on a lifted cj7. they stick out way to much imho. nice design but i would pass.

jcarlos
04-01-13, 03:24 PM
Thanks for the comment.

I called Rohana again and was told that spacers would be needed in the front and the back and that the stance would be very aggressive as a result. Even though I really liked the design of the wheel, I would rather avoid spacers and have proper fitment. The coupe is a different story since the OEM offset is +40 instead of +56 and these wheels would work with it.

I went with the XO Paris wheels with +35 in the front and +42 in the rear, and was assured that these offsets would clear the calipers without spacers and with a slightly aggressive stance in the rear.

thebigjimsho
04-04-13, 10:37 AM
What is the weight on these wheels?

jcarlos
04-08-13, 01:18 PM
The weight is not listed in their specs; I have emailed them and will post the results when I have them.

----------

....That was a quick reply from XO! 28lbs for 20x8.5 and 33lbs for 20x10.