: Parting out 1999 STS with Studded Engine, last chance!



kobrien8
06-04-12, 08:30 PM
I am parting out my 1999 black on black STS. The engine is studded with Jake's Sure Grip Studs and the half case was completely re-sealed. The car was hit and the frame was bent so it is time for it to go. The engine has many new parts (oxygen sensors, ignition module, injectors, intake, plugs, wires, mas air) and only has 117k miles on it, 3k since the stud and re-seal job. Rims are good, shocks are not. Many interior parts still left. Last chance, the car must go by the end of the week! Let me know what you need and I will give you a great price. Thanks!

92981

1997esc
06-04-12, 10:54 PM
Black on black you say. Do you still have the front passenger door panel? 1 front bose door Speaker?

kobrien8
06-04-12, 11:22 PM
I do....the passenger side door panel is in great shape. I am sure the drivers' side Bose speaker is fine. I know the passengers' side speaker had a bit of a buzz in it.

97EldETC
06-04-12, 11:43 PM
How much for the whole engine block?

kobrien8
06-05-12, 12:22 AM
I am thinking that $1500 would be a fair price for the engine given that it has all of the work done to ensure that it won't have a head gasket problem. This is an entire turn key engine, full swap. I will even include all of the belt driven accessories. I have already had a couple of offers....$1500 would get it done

ternstes
06-05-12, 06:15 AM
Is your trunk floor carpet in good shape? Do you have the trunk mat that lays in there as well? I would like them if possible.

1997esc
06-05-12, 01:49 PM
I can't do pm's yet so if you can quote me a price for the door panel and speaker that would be great. or give me an email or phone number to call.

kobrien8
06-05-12, 04:07 PM
$40 plus shipping for the door panel and speaker.....I don't have the trunk mat, but I will check on the shape of the trunk carpet. My guess is that it isn't in that great of shape since the trunk hasn't fit right since the accident, but I will look!

1997esc
06-05-12, 08:22 PM
Ill take the door panel and good speaker please. Just to confirm the door panel is black? Can you get me a shipping quote to 53081. And with this post I have 10 posts so you should be able to pm me now.

kobrien8
06-06-12, 12:10 PM
Door panel is definitely black! I will get the details and PM you!

1997esc
06-08-12, 09:47 PM
haven't heard anything so was wondering what the status was.

ThumperPup
06-09-12, 01:41 AM
you still have the factory space saver spare ?

scott_sls
06-09-12, 11:21 PM
I was wondering if you would part the BPMV module?

I WANNA-V
06-10-12, 08:27 PM
If the grill isnt broken i need it. Followed a new Vette at ummmmmmmmm excessive speed and found out that they throw anything thats on the road up into your grill!

kobrien8
06-11-12, 11:57 AM
I don't have the factory spare.....BPMV module, the ECM? I have it and would sell it! The grill is in good shape! Sorry I was out of town for the weekend, but I am back and will get the parts off today and get your guys prices! THanks!

kobrien8
06-11-12, 12:01 PM
1997esc....I can't see the option to send you a PM? I will have the door panel off today and get you a shipping quote ASAP! Sorry for the delay, I was out of town for a long weekend.

1997esc
06-11-12, 08:59 PM
Thats fine if you want me to post my email so you can contact me I can do that. Otherwsie let me know what it is shipped to 53083 and let me know how to pay you.

scott_sls
06-11-12, 09:10 PM
Perhaps I have the wrong name for it. It is the ABS motor that is causing my dash to light up like Christmas. I keep getting a C1243 Brake Pressure Modulator Valve (BPMV) Pump Motor Stalled error.

kobrien8
06-11-12, 10:42 PM
It sounds like you are looking for the ABS controller....a big box with all of the brake lines coming out of it? I have that but I am not sure if it is any good....I wouldn't want to risk sending you something that wasn't in perfect working order. The part you are looking for, does it sit in the very front, driver's side?

Rob Seville
06-14-12, 12:13 AM
Inner trunk-mounted tail-light assembly? I need the whole lower with the tail, reverse and license plate mount/lights for my 2003 Seville. 1998 & up is all supposed to be the same. I want one in good shape with no cracks or discoloring.

scott_sls
06-14-12, 09:39 AM
Yes, that is the part.

1997esc
06-14-12, 01:04 PM
Any updates?

consigliori
06-14-12, 01:37 PM
Whatcha want for the steering wheel? And what condition is it in? Thanks!

MoistCabbage
06-14-12, 01:41 PM
^^^ The wheel from a '98+ Seville won't fit either car in your profile.

consigliori
06-14-12, 01:49 PM
^^^ The wheel from a '98+ Seville won't fit either car in your profile.

Um, nevermind-

(lol, thanks!)

kobrien8
06-14-12, 02:16 PM
Any updates?

The online shipping quote to you is around $22....If it is any more than that, I will cover it! Can you send me a PM? Or post your email address? I have everything ready to go, even tested the drivers door Bose speaker to make sure it works fine!

kobrien8
06-14-12, 02:18 PM
Whatcha want for the steering wheel? And what condition is it in? Thanks!

Sorry but the steering wheel is no good....Airbag deployment pretty much did it in!

kobrien8
06-14-12, 02:20 PM
Inner trunk-mounted tail-light assembly? I need the whole lower with the tail, reverse and license plate mount/lights for my 2003 Seville. 1998 & up is all supposed to be the same. I want one in good shape with no cracks or discoloring.

I have the whole assembly you are looking for. It is in really good shape. I will go over it once more to be sure. Send me a PM and I will give you a price! Thanks

kobrien8
06-14-12, 02:22 PM
Yes, that is the part.

I have that part and it looks to be in decent shape but I couldn't guarantee its working condition since I have no way to test it with the car in pieces. If you are interested $20 would certainly be worth the chance!

papoosests01
06-14-12, 05:58 PM
Can you get a price together for driver side door driver side front fender and what's the condition of the front bumper cover I see it sagging a bit but is it broken or cracked?

1997esc
06-14-12, 09:21 PM
kobrien8


you can email me at jeremyworden1984@yahoo.com. I tried doing a pm but I dont think I am allowed to yet. Email me and we can take care of everything through there. Thanks alot.

drewsuf82
06-14-12, 09:27 PM
Anyone know if the EBTCM from this car is swappable with my 96 ETC?

1997esc
06-17-12, 01:16 PM
Just for the record, the above email address is NOT to the person who is parting out the car. I am a person buying parts and it was posted in order to contact the op. Please do not send me requests for parts as I can't help you. On that note, any updates? I am waiting to hear back so I can send op money for the door panel and speaker.

LaidbackSTS
06-18-12, 12:29 AM
I would be intrested in the tail lights if you still have them. Let me know. candc.nag1@gmail.com

kobrien8
06-18-12, 12:27 PM
Can you get a price together for driver side door driver side front fender and what's the condition of the front bumper cover I see it sagging a bit but is it broken or cracked?

The front fender is slightly bent at the bracket, but depending on what you are currently have it would be an upgrade. A couple of blows with a dead blow hammer would make it fit perfectly again. I would just throw that in with the door if you wanted it. The bumper cover is definitely not any good at all. As far as the driver's side door goes, it has no dents and fits correctly. There are a couple of scratches where the keys from the key chain touched the door right beneath the lock cylinder. Are you looking for the entire door including the inner panned and window mechanism? If so I can do that, but you would need to swap the speaker from your door to this one (very easy) because I already sold that part. $125 for the door and I will thrown in the fender if you would like?

kobrien8
06-18-12, 10:30 PM
kobrien8


you can email me at jeremyworden1984@yahoo.com. I tried doing a pm but I dont think I am allowed to yet. Email me and we can take care of everything through there. Thanks alot.

I sent you and email

scott_sls
06-19-12, 12:06 AM
I have that part and it looks to be in decent shape but I couldn't guarantee its working condition since I have no way to test it with the car in pieces. If you are interested $20 would certainly be worth the chance!

I tried to PM You but it said your box was full. Send me an electronic mail to

Scott
Then the at sign
Scott Slusser ( remove the space )
Dot com

$20 sounds fine with me as i am not 100% sure that is my ailment. If your car didn't have the ABS or Traction Control lights on I'm willing to give it a go. The brake fluid is overdo for a change anyway.

BigE#24
06-28-12, 01:16 PM
Did you get rid of the car yet?

kobrien8
06-28-12, 09:48 PM
I still have a lot of it....any requests?

postman2000
06-29-12, 01:45 AM
Do you still have the engine?

scott_sls
07-02-12, 11:34 PM
Do you still have the drivers side mirror? If so has it started to melt yet? The other thing is the overhead garage door door / light module?

PS. I haven't had a chance to change out the ABS motor but thanks again!

kobrien8
07-03-12, 01:40 AM
The engine is still available...it is sitting in my garage right now ready to be sold!

kobrien8
07-03-12, 01:41 AM
The driver's side mirror seems to be fine, no melting from what I can tell!

kobrien8
07-03-12, 01:42 AM
The Homelink system has been sold. Sorry!

sts 03
07-03-12, 06:22 PM
I need a passenger side mirror motor and the splash guard/ air deflector that goes underneath the radiator/engine compartment.

kobrien8
07-04-12, 09:55 PM
The mirror motor I can do, not sure about the splash guard, it might be broken but I will check!

sts 03
07-04-12, 11:05 PM
Its the air deflector that goes under the radiator , its one piece long black plastic .please let me know if its in good condition.

scott_sls
07-05-12, 08:09 PM
The driver's side mirror seems to be fine, no melting from what I can tell!

I think that I can take the mirror out of the housing. I will double check and let you know. How much are we talking?

sts 03
07-05-12, 11:33 PM
Did your car have a strut brace?

scott_sls
07-06-12, 10:53 AM
http://www.cadillacforums.com/forums/images/misc/quote_icon.png Originally Posted by kobrien8
The driver's side mirror seems to be fine, no melting from what I can tell!




I think that I can take the mirror out of the housing. I will double check and let you know. How much are we talking?

The FSM says I should be able to take the glass out of your housing and put it in mine. Shoot me an email with a price and thanks again!

kobrien8
07-06-12, 02:16 PM
Did your car have a strut brace?

This car did not have a strut brace. The splash guard is in decent shape and would still work but it is definitely not in like new condition. If you don't have one at all this one would be worth it for you. Shipping might be somewhat high though?? You also want the passenger's side rear view mirror....the entire assembly? It is in good working order! Let me know and I can pull it off.

kobrien8
07-06-12, 02:17 PM
http://www.cadillacforums.com/forums/images/misc/quote_icon.png Originally Posted by kobrien8
The driver's side mirror seems to be fine, no melting from what I can tell!





The FSM says I should be able to take the glass out of your housing and put it in mine. Shoot me an email with a price and thanks again!

So you are just looking for the driver's side mirror glass? $15 plus shipping seems fair

sts 03
07-06-12, 03:24 PM
Thanks for checking, but I got one from a junk yard for $20

scott_sls
07-14-12, 02:03 PM
So you are just looking for the driver's side mirror glass? $15 plus shipping seems fair

Sounds good to me. Ill send you the $15 and you can let me know the shipping cost.

bsstyle2011
07-19-12, 04:41 PM
Still have the driver side mirror and did yours have the seat memory for the mirror? If it's in good condition how much?

I just need the glass it should just pop out.

bsstyle2011
07-19-12, 04:42 PM
Aww I didn't see the above post. Grrr if he didn't get it I want it. :)

Seanm0918
10-29-12, 02:11 PM
Do you still have the mass air flow sensor and housing?

thanks

game.tech-us
11-02-12, 01:09 AM
I need the DDM - driver door module, black box behind the door panel, would buy the switches if they haven't been sold with the panel.
Also need driver quarter mounted tail light (outer assembly).
Jason
game.tech.us att gmail dott com

Edit - found these parts for cheap on Ebay, but if the module doesn't work I may still want yours...

Eric 1999 cad sts.
11-17-12, 06:38 PM
Hey let me know if you have any parts left....looking for all kinds.back lights and the led back trunk light/ fog lights head lights..and heated seats mod / let me know thanks ...joshua29ea@yahoo.com:sneaky:

DamianMcKenzie
04-15-13, 12:07 PM
Do you still have the fuel rail?

Hacksaw122
05-05-13, 03:00 AM
Did you sell the drivers side door mirror?

My has the auto dim feature and has turned colors.

Thanks,
Chris

bes stroked nova
07-08-13, 12:19 AM
has the engine sold? How far are you from Cincy Ohio?