: D3 powered CTS-V German Export Wagon (Pictures)



Dr. Design
04-04-12, 09:41 PM
Hello All,
Just finished another build and thought we would share some images with all of you:

http://i143.photobucket.com/albums/r134/ctd3rnd/D3poweredCTS-VGermanExportWagon-05.jpg

http://i143.photobucket.com/albums/r134/ctd3rnd/D3poweredCTS-VGermanExportWagon-04.jpg

http://i143.photobucket.com/albums/r134/ctd3rnd/D3poweredCTS-VGermanExportWagon-03.jpg

http://i143.photobucket.com/albums/r134/ctd3rnd/D3poweredCTS-VGermanExportWagon-02.jpg

http://i143.photobucket.com/albums/r134/ctd3rnd/D3poweredCTS-VGermanExportWagon-01.jpg

http://i143.photobucket.com/albums/r134/ctd3rnd/D3poweredCTS-VGermanExportWagon-06.jpg

For more information on this build or the D3 products used to complete this build, please visit www.d3cadillac.com or contact one our our reps at info@d3cadillac.com.

Thank you,

Dr. Design
D3 Cadillac

gmdt
04-05-12, 02:48 PM
this car goes to germany?
do you know if a 21 or 22x12 wheel will fit on the cts-v coupe in the rear?

Rule12b
04-05-12, 03:28 PM
Those wheels are sick!

Dr. Design
04-05-12, 07:18 PM
Hello,

Yes this car is off to Germany. We have done several cars for this particular customer and this is the newest one to his stable.

As for your question regarding 21" & 22" wheels fitting on the coupe. Not 100% sure you can fit a 22x12 in the rear of the coupe. We have seen 21 & 22's, but not in that width.

Coupe shown with a 22x11 rear wheel.
http://www.d3cadillac.com/wp/wp-content/uploads/2011/11/D3-ULTRA-V-Coupe-1.jpg

Thank you,

Dr. Design
D3 Cadillac




this car goes to germany?
do you know if a 21 or 22x12 wheel will fit on the cts-v coupe in the rear?

gmdt
04-06-12, 12:30 PM
Ok Thanks,
Will 22 fit without any problems or do i have to Roll the Fenders or something like that?
Which dimensions do These Wheels have on your picture?
Offset and so on.?

SoCalCTSV
04-06-12, 12:34 PM
Hello,

Yes this car is off to Germany. We have done several cars for this particular customer and this is the newest one to his stable.

As for your question regarding 21" & 22" wheels fitting on the coupe. Not 100% sure you can fit a 22x12 in the rear of the coupe. We have seen 21 & 22's, but not in that width.

Coupe shown with a 22x11 rear wheel.
http://www.d3cadillac.com/wp/wp-content/uploads/2011/11/D3-ULTRA-V-Coupe-1.jpg

Thank you,

Dr. Design
D3 Cadillac

That's meaty!

gmdt
04-06-12, 03:33 PM
i sent you an email to your email address on your homepage.
would be great if you can reply to it.

thanks


Hello,

Yes this car is off to Germany. We have done several cars for this particular customer and this is the newest one to his stable.

As for your question regarding 21" & 22" wheels fitting on the coupe. Not 100% sure you can fit a 22x12 in the rear of the coupe. We have seen 21 & 22's, but not in that width.

Coupe shown with a 22x11 rear wheel.
http://www.d3cadillac.com/wp/wp-content/uploads/2011/11/D3-ULTRA-V-Coupe-1.jpg

Thank you,

Dr. Design
D3 Cadillac

peso611
04-26-12, 12:20 PM
On the wagon it looks like you adjusted the camber. What are the wheel and tires sizes? What mods did you have to do for the wagon to sit so lovely?

Greg_D3
04-26-12, 10:11 PM
Peso611,

The car was aligned to factory specifications, as for the wheels they are 20x9 with a 255/35/20 front and a 20x11 with a 295/30/20

peso611
04-27-12, 12:14 AM
They look great does it have a drop/springs or spacers?

CoppeR
04-27-12, 09:42 AM
Peso611,

The car was aligned to factory specifications, as for the wheels they are 20x9 with a 255/35/20 front and a 20x11 with a 395/30/20

Damn!!! 295 is i imagine what u mean hehe

Greg_D3
04-27-12, 03:52 PM
Damn!!! 295 is i imagine what u mean hehe

Good eye, you are correct it is a 295.

peso611,

it dose not have springs (customer was worried about his drive way), no spacers were needed as we had the wheels custom made to our specs.

peso611
04-27-12, 04:32 PM
Good eye, you are correct it is a 295.

peso611,

it dose not have springs (customer was worried about his drive way), no spacers were needed as we had the wheels custom made to our specs.

Thanks !

Can you PM me the cost for these in black with tires?

D3 Outlet
04-30-12, 09:41 PM
Hello Peso611,

This set up will run you $5590.00 with Toyo Tires. Please let us know if We can help you with anything else, We would be happy to help.

Kmajecki
04-30-12, 10:11 PM
http://www.d3cadillac.com/wp/wp-content/uploads/2011/11/D3-ULTRA-V-Coupe-1.jpg

Can you post the link to more pics of this car? I swear it used to be on your gallery page but i cant seem to be able to find it

D3 Outlet
05-01-12, 04:43 PM
This car is under our 2011 SEMA featured Car Section, Here is the link:http://www.d3cadillac.com/news/latest-news/d3_sema-2011