: TCC Solenoid In Car Replacement

10-23-11, 08:20 PM
Courtesy of Oldfart


10-30-11, 07:48 AM
This video is great. I have done 2 TCC replacements using his method. The only things I did different was that I did not loosen the pass side motor mount, tilting the engine really did not add any more room. The other thing I did when it was apart was to slightly 'trim' the bracket which runs from the drivers side motor mount to the trans case. I took about 3/16" from the thickness where the upper bolt runs thru. Then I shortened the bolt around 1/4". The greatly aided reassembly, and will aid disassembly if you ever have to take it off again.

12-01-11, 12:11 AM
this job took me one week in my garage and all i have to say is i will never ever no matter how much somebody pays me or offers me to do this ever do it again. a complete nightmare.

03-15-14, 07:15 PM
Agree, doing this now. Hairpin clip fell inside transaxle case and we can't find it! ! Next time we drive w/ the dang light on. 10 hr nightmare about describes it, my dad hsd been a mechanic for 40 yrs and he's having a hard time! !! Uncle uncle!