: Looking for a SPECIFIC N* Removal Guide



andyoww
08-27-11, 12:01 AM
A little about me:
I recently purchased a 1997 Deville with a bad headgasket.
This is the third Caddy I have owned.
My other two were: 1975 Sedan DeVille (sold in 1999), 1976 Coupe DeVille (sold in 1996).
I decided it was time to get another Caddy & after a little research, actually started looking for something WITH a blown headgasket (so I could pick something up cheap, then fix it myself).

While I'm not a mechanic, I was raised on a farm & have wrenched on vehicles my entire life.

Now on to the reason I'm posting.
A few months ago while deciding what I wanted to get, I ran across a post that had step-by-step pictures on how to remove the cradle, insert the time-serts, then replace the cradle.
THAT was the post that made my mind up that I was indeed going to purposely get one that had the bad gaskets.

Of course, I did not bookmark it & now I can't find it anywhere.
I have searched my history & looked & looked all over, but I am unable to find it.

I'm posting to see if anybody has a link to this post.
I can't even be sure it was on this site, but in searching, this site came up quite consistently, so I decided to join.

I am looking forward to tearing this apart & having a very nice car, for very little money.
If this goes well, I may try my luck at another one as well, but first things first.

I really appreciate the help I know will come.

Ranger
08-27-11, 01:35 PM
:welcome:

Check the Tech Tips section.

mmidyette
08-27-11, 04:14 PM
Might it be one of these?

vincentm (http://www.cadillacforums.com/forums/northstar-performance-technical-discussion/215739-97-eldorado-etc-hg-repair-project.html)

JoeTahoe (http://www.cadillacforums.com/forums/northstar-performance-technical-discussion/219764-99-sts-project.html)

vincentm
08-28-11, 10:12 AM
I posted a guide that included a word document I slapped together on how to yank it out the top..check threads I've started, overall if you're experienced in auto mechanics, the Northstar isn't any other engine, removing one is a bear of a job, good luck and keep us updated include pictures!

andyoww
09-04-11, 12:39 PM
Thanks for your responses.
I apologize for not responding earlier.
I had some bad things happen here.


I have looked through the tech tips section & also at both of those posts.
Neither are the article I am looking for, but there's enough information here to give this a go.


Vincent, I saw your walkthrough.
I don't think I want to try to remove this through the top the first time.

Thanks again!

zonie77
09-08-11, 07:01 PM
This one has links to others. Hope it helps.

http://www.cadillacforums.com/forums/northstar-performance-technical-discussion/176057-n-engine-removal-newbee.html

andyoww
09-09-11, 04:21 PM
Zonie,
Thanks. Those are not the exact ones I'm looking for, but I think I have enough info now to give it a go.