: CNC ported LSA head sale. I have 313 sets in stock ready for your car. $1100.



wait4me
06-23-11, 10:11 AM
Got alot of heads to get rid of.

They are CNC ported to flow 351 CFM at 600 lift on the intake. 233 cfm on the exhaust. At 700 lift on the exhaust, the cfm is 240s.
From .400 lift on they are past 300cfm.
Stock castings are in the 280cfm range so this is a massive increase over stock..

Then i hand paper roll the runners..

Put on a nice multi angle valve job.

They are opened up to be a 276cc intake runner and a 92.5cc exhaust for max boost performance.


The real gain on these are from opening up the valve seat area during the valve job / runner blend... Something you cant do with a hand port.


No core charge required.

I can do custom specific port work for no additional charge if you need/want something specific.

kcshaner
06-23-11, 10:15 AM
If I were to offer you my stock heads as a core, would you be able to cut me a better deal? Also, how much for your catless mid pipes?

Thanks.

dvandentop
06-23-11, 10:35 AM
pics of the pile of 313 sets??? :eek:

CTSV4now
06-23-11, 12:06 PM
Are these bare?

wait4me
06-23-11, 12:09 PM
I have some stock parts to put on them if you want stock stuff that i could throw in the box.

Or i can assemble them for free if you just buy what ever valves and springs you want in them.

musclesbmf
06-23-11, 02:06 PM
What is the price assembled with springs for use with one of your cams, and whatever valves you recommend?

Thanks,
Mark

94guy
06-23-11, 05:53 PM
who did the cnc work?

SSideways
06-24-11, 09:39 PM
do you have any stock heads? (non-ported) if so, how much?

dvandentop
06-25-11, 03:30 PM
how much for a pair with patriot gold duals and LS3 intake with Inconel exhaust valves???

would like to know as ready to purchase soon but dont want to wait all summer to get some either.

TMC CL65
06-25-11, 07:19 PM
Would you need a custom tune for the CNC ported heads? Also, what sort of gains would you expect from these heads with say a CAI, 9.55" lower pulleyand exhaust?

Tom

dvandentop
06-26-11, 12:09 AM
Would you need a custom tune for the CNC ported heads? Also, what sort of gains would you expect from these heads with say a CAI, 9.55" lower pulleyand exhaust?

Tom

yeeeep same mods here

wait4me
06-26-11, 10:54 PM
how much for a pair with patriot gold duals and LS3 intake with Inconel exhaust valves???

would like to know as ready to purchase soon but dont want to wait all summer to get some either.


Fully assembled ready to go with the above choice would be $1800 shipped. I have them in stock, and can ship them out same day payment is sent usually. It only takes an hour to assemble them to your specs. I have those valves instock as i use them on all the builds that dont ask for Titanium.

wait4me
06-26-11, 10:56 PM
do you have any stock heads? (non-ported) if so, how much?


I do have a few stock sets somewhere, but they are dirt cheap thru gm, it might be better just to buy a new set??? By the time you surface them, clean them, crack test them, it is near the cost of the new set....

SSideways
06-26-11, 11:53 PM
jesse,

thanks for your honest opinion. by chance do you have part numbers for new stock heads.
Darren

wait4me
06-26-11, 11:57 PM
12626958 was the assembled part number, they are about 440 each. But somewhere i had a partnumber for the empty ones,and they where like 200 a head somewhere.

DrumStix
06-27-11, 12:32 AM
I picked up some sets of bare LSA cores for $389/pair.

KillSwitchNY
01-04-13, 06:07 PM
I see this one is an old thread, but barely any responses. Are any of these sets still available?

wait4me
01-05-13, 05:59 PM
No, I had sold every single set to a major company that sold them as their own. They went in about 7 days.

flavorwrench
01-20-13, 01:08 PM
ching ching... nice. BTW, you should write a book with your knowledge Jesse.

libby
12-02-13, 12:06 AM
interesting