: Emblem/Crest Dimensions



8th Day
12-08-10, 12:49 PM
Would someone be willing to measure the crest emblems on their vehicle for us?
We are looking at producing vinyl emblem overlays for the whole fleet of Cadillac models and need the widest dimension to scale our cut file to.

We need a measurement for the front, back and steering wheel emblems.

The measurement we need is the one labeled 3.20 in the diagram below (those are the dims for the crest on the CTS-V):
http://www.8thdaycreations.com/images/Cadillac/CaddyFrontEmbDims.jpg

Here are the overlays and models that we currently offer:
http://www.8thdaycreations.com/products-page/decals/wreath-skull-emblem-overlay/

http://www.8thdaycreations.com/wp-content/uploads/wpsc/product_images/wreathskulloverlay2.jpg

Lev Blekher
12-14-10, 05:39 AM
Cool emblem. I could do this for you, but wouldn't it be easier to go to a dealer and do it? My caliper is at my house and I won't be there for a while. Here at the apartment I only have a tape measure which will allow me get mm. Is that satisfactory? Otherwise sometime next week I can use a digital caliper.

8th Day
12-15-10, 06:55 PM
Either metric or SAE measurements will be fine. :)

Thanks!

USSBlackPearlUSMC
12-15-10, 11:28 PM
Those are pretty sweet. Ill have to put those on mine when they are complete. Im going with a DTS-V recreation, or creation if you will, and I named it the Black Pearl (Pirates of the Carb., and its a Boat) and it needs a jolly rodger!