: GM Parts Price Request



bsr22
10-10-10, 02:15 PM
Chris,
Iíd like to check the price of the following parts shipped to 20198. These are Chevy / GMC truck parts. Iím fairly sure I remember reading a thread where you stated you can order all GM parts; however, I canít seem to find it now. Thanks in advance.

2 upper cab mounts: 25994881
2 lower mounts (bushings): 25791032
2 washers: 15854745

Scott

RippyPartsDept
10-10-10, 04:52 PM
yeah... i can do that for you...
stay tuned

RippyPartsDept
10-10-10, 04:59 PM
Here's the pricing list (prices are at forum discount)

#25994881 - $35.15 ea
#25791032 - $28.60 ea
#15854745 - $ 2.97 ea
I don't stock any of these but can get them in one day if we order before 4pm

Bluehaze07
10-11-10, 03:42 AM
Hey,

I don't have the part number but how much would it be to to order rear sail panels (C pillar) for a 05 CTS in neutral. Thanks.

RippyPartsDept
10-11-10, 09:32 AM
I'll need to know your interior trim color to price those out for you
You can either get me your VIN or check your SPID label in the trunk for 70I, 13I or 19I option code

Bluehaze07
10-11-10, 11:54 PM
Here is my VIN: 1G6DP567X50113379

RippyPartsDept
10-12-10, 11:26 AM
looks like the trim color is 'neutral' (which is one of the tan colors)

The list price is around $120 each
I can sell them to you at $86.25 each plus some shipping (the box will be pretty big, but not very heavy)

bsr22
10-12-10, 08:02 PM
Here's the pricing list (prices are at forum discount)

#25994881 - $35.15 ea
#25791032 - $28.60 ea
#15854745 - $ 2.97 ea
I don't stock any of these but can get them in one day if we order before 4pm

Thanks Chris....does that include shipping cost? If not, just a rough estimate?

Thanks Again,
Scott

RippyPartsDept
10-12-10, 09:33 PM
You're very welcome Scott
I do need to know where you are to quote shipping.
Zip Code is best - you can PM me if you're privacy conscious, but you'll need about ten posts before you can send a PM

bsr22
10-12-10, 09:56 PM
Ah....in my initial post, but no worries. 20198

Responding on Sunday, and almost 9 PM on a weekday......tell me you take some time off? I appreciate the service, but don't forget about you. :tisk:

Thanks,
Scott

RippyPartsDept
10-12-10, 11:28 PM
DOH
... so how many of each part are you looking to get?
I'll work up a total price tomorrow...

I'm an insomniac (sometimes) and a work-a-holic - but yeah I get my 'me' time in too
Plus I have access to the site on my phone which makes it easy to reply when I'm out and about.
Thanks for noticing and caring though.

bsr22
10-13-10, 08:33 PM
I hear ya and can relate. That's why I gave you this; :tisk:

Plus I know there is lots to do in Wilmington besides work! I was born and raised there. I saw the Rippy Caldilac name and thought of home. When's the last time you had a Paul's Place hot dog?

Just don't burn yourself out. :thumbsup:

Looking two of each part number.

Thanks!

RippyPartsDept
10-13-10, 10:23 PM
It's actually been quite a while since I've even been out to Castle Hayne. I used to have friends who lived just past Pauls Place.

When was the last time you watched Maximum Overdrive?

But back to more current matters...

Looks like the pkg will be about 15lbs - I ran two shipping estimations on the UPS site using different dimensions that it could come to and they came to $15 and $20
(we'll charge the exact when we ship)

So just say $20 for shipping to err on the high side, then your total would be $153.44 (if I do my math right - and I usually do).

Give me a call when you're ready so we can get payment and get the order in. If we order before 4pm then we'll get the parts the next day. Given the UPS time estimate you'd get them in 3 days (counting the day to get them from GM to me, ie 2 days on the UPS truck).

Bluehaze07
10-29-10, 08:40 PM
hey,

I sent you a PM about a part. Thanks.

RippyPartsDept
10-29-10, 08:57 PM
gotcha covered... look for my reply in the morning