: New Vendor Here- running some specials



ajt1986
05-23-10, 11:21 PM
Hey guys,

I just signed up for a vendor membership here so i can start selling our products here. First ill tell you a little about us. My name is Andrew Traenkner, i own Traenkner Performance in Gibbstown, NJ. We are a 1200sqft facility in Southern NJ. Im a ASE master tech GM trained as are my other 2 techs, and we are expanding into the parts buisness. Im an authorized vendor for Raptor Performance, Magnaflow, Meziere water pumps, Fragola and Magnafuel fuel systems, Glowshift Gauges, and LED Glow vehicle lighting.

Since we are trying to get our feet wet ill be running some specials on...

Magnaflow 16636 cat back system for 04-05 CTS-V
Magnaflow 16637 cat back system for 06-07 CTS-V
Raptor Performance Shift Lights- i have one in my person V hidden behind the HVAC vent- its a extreamly high quality light
Meziere LS6 Electric Water Pump for stock or altered accessory drives

the glowshift guages we offer are a nice quality but inexpensive gauge- i was hesitant at first because i didnt know the name brand but ive compared them to my autometer gauges that we have and they are all within 2% wich is the accuracy stated by autometer you can check them out a glowshiftguages.com and contact me for special pricing

most companys have a minimum advertised price that i can put on things so if your interested email me at andrew@traenknerperformance.com
our website should be up in about 2 weeks with all we have to offer- if your looking for anything for your V dont hesitate to ask!

thanks!
Andrew Traenkner
Traenkner Performance

deedubb
05-23-10, 11:26 PM
Welcome aboard!

ajt1986
05-23-10, 11:35 PM
thanks man!

by the way heres a picture of my 05 V, we made a custom intake for it, custom X pipe, magnaflow mufflers, we made a set of 4" polished tips for it. next step is powdercoating the rims, this was the night i got it.......

http://www5.snapfish.com/snapfish/slideshow/AlbumID=1505231025/PictureID=50057623025/a=2939148025_2939148025/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfish/

in the past few weeks we cleared the fog lenses, added 6000K 55 watt HIDs to the fogs, added the GM spoiler and put 275/40s for the rear tires

deedubb
05-23-10, 11:37 PM
Nice! I need to get some magnaflow mufflers with 4" tips too......

lilgCTS-V
05-23-10, 11:39 PM
hey nice to see ur in the dirty jersey, lets see the intake i might need you to make me nice piece for my V

ajt1986
05-23-10, 11:49 PM
ill take a picture of the tips tomorrow, i can get anything from magnaflow, if your interested in just mufflers let me know. if you search my user name in the perfromance section youll see my intake that i made for my V, we have redesigned it like 15 times haha- its all 4", 4" elbow, 4X9" cone filter, all new t bolt clamps instead of cheap worm clamps, and a 4-3.5 silicone adapter for the MAF to pipe connection- we do them with or without heat sheilds, we can do polished aluminum, polished stainless steel, or painted a color of your choice at our body shop for about 20$ extra. if your interested in anything feel free to email me and if you want ill get you my number and we can talk! our intakes range from 130-175 depending on the options, they do bolt to the radiator support so they wont contact the powerstreeting pulley- thats why we use a 4" rubber elbow on the TB so it gives it some flex

tips we do 100$ for the pair- they are t304 stainless hand polished straight cut or any angle of your choice- i did 15* it looks good with the bumper

deedubb
05-23-10, 11:51 PM
Yeah, cool. I'd like to see some pics of the tips.

Houdini
05-24-10, 09:39 AM
Andrew, didn't you say you might sell x-pipe kits with connection pipes? I thought I remember you mentioning something about this in another thread.

ajt1986
05-24-10, 12:01 PM
we will be offering the cut- and slip on X pipes in the coming weeks, our new shop isnt 100% ready yet so we have been crazy backed up working out of like 3 different places! id say we will have 20 x pipe kits ready to ship by june 15th

Houdini
05-24-10, 03:15 PM
Cool, let us know!

c4ss
05-24-10, 06:42 PM
:welcome:

The shift light might be cool. Any videos of it on your V?

ajt1986
05-24-10, 08:00 PM
i left the V at the shop for a night so i could take home my truck, but tomorrow ill snap some pictures of the install and take a night time video on my way home, i gotta find a co piolet or way to mount the camera from my POV

ELES6CTS
05-25-10, 01:27 AM
Welcome aboard. I read another thread where you mentioned the X-pipe as well. I'll probably be buying one of these from you guys in the near future.

Natedog
05-25-10, 05:32 PM
Welcome! I'm interested in the 4" tips... are they double wall? photos would be most appreciated when you get a chance.. thx

c4ss
05-25-10, 05:42 PM
:postpics:

PrelateBishop
05-25-10, 06:23 PM
Welcome to the site!

E-mail is on the way, inquiring about a cat-back exhaust.

fnipunk
05-25-10, 06:45 PM
Put together a connection pipe to make Magnaflow cat back connect to Kooks Headers!

ajt1986
05-25-10, 09:58 PM
nah the tips are single wall, when your hand making them they arent worth the money to do the double wall, i wanted to take a video of the shift light tonight but i didnt have a guy to hold the camera while i drove, i promise ill have pics and vids of the shift light, tips, and x pipe tomorrow. thanks for all the interest! im doing this stuff as cheap as possible, instead of trying to make 300$ on an exhaust kit i make around 30, we are out to help guys afford stuff they normally wouldnt beable to. when i didnt have money it was awsome when certain vendors would hook me up so we are just trying to pass it on

lilgCTS-V
05-25-10, 10:27 PM
thats what i like to hear ^ thats what modding cars should be all about really helping car guys be car guys and being able to hook up there rides with out pulling a second morgage

c4ss
05-25-10, 10:38 PM
:yeah:

And it's always nice to have another Jersey guy on the forum :yup:

ajt1986
05-25-10, 11:01 PM
by the way we also do work on Vs for any guy that would rather just have somone else do it, me and my guys all came from GM dealers so we arent a bunch of hacks:hmm:

ajt1986
05-25-10, 11:33 PM
we are also doing bolt in high flow cats, we are trying to find a couple sets of bad cats so we can make up a jig, if we get it going we can do them for 210 for the pair plus either core charge or your old cats so we can keep them going. they will be magnaflow high flow cats welded on to the stock pipes so there wont be any fitment issues

Natedog
05-26-10, 03:01 PM
Awesome to hear about the cats. There is another vendor on here that just got out their first set of high flows for $275 .. good to see more options coming along!
http://www.cadillacforums.com/forums/2004-2007-cadillac-cts-v-general/139617-new-high-flow-cats-may-available.html

thebigjimsho
05-27-10, 06:37 PM
Wanna see some shift light, dammit!

jerrycecco
05-27-10, 08:04 PM
we are also doing bolt in high flow cats, we are trying to find a couple sets of bad cats so we can make up a jig, if we get it going we can do them for 210 for the pair plus either core charge or your old cats so we can keep them going. they will be magnaflow high flow cats welded on to the stock pipes so there wont be any fitment issues

put me down as interested, and I send back my old catted pipes -- no problem...
when do you think you have pieces to ship?

jerrycecco@tx.rr.com

ajt1986
05-27-10, 11:07 PM
heres some pics of the shift light

http://www5.snapfish.com/snapfish/slideshow/AlbumID=1518802025/PictureID=50548367025/a=2939148025_2939148025/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfish/

http://www5.snapfish.com/snapfish/slideshow/AlbumID=1518802025/PictureID=50548369025/a=2939148025_2939148025/otsc=SHR/otsi=SPIClink/COBRAND_NAME=snapfish/

thebigjimsho
05-28-10, 12:01 AM
That's a great setup...

Houdini
07-15-10, 10:09 AM
Bump...

Any update on the fitted high flow cats you were talking about? I'm very interested in purchasing those along with an x-pipe setup.

shadybx7
07-15-10, 11:14 AM
by the way we also do work on Vs for any guy that would rather just have somone else do it, me and my guys all came from GM dealers so we arent a bunch of hacks:hmm:

how much to install a set of motor mounts on a car with headers??