: Vacuum line routing?



eldorado1
07-13-04, 03:14 PM
I need some help figuring out what goes where on this 96 intake manifold... I labeled all the ports A-F in these 2 pics here. Also, is it correct that the port labeled "E" should be connected to the FPR? On my 95 manifold, it was connected to "C"... :hmm: Any help is appreciated. Thanks,

eldorado1
07-14-04, 11:40 PM
aaaaaaany ideas ladies?:yawn:

Ranger
07-15-04, 10:11 AM
A - Left bank (front) cam cover right (passenger) side
B - PCV valve
C - Evap canister purge valve (port next to electrical connection, right bank cam cover)
D - Power brake booster
E - FPR
F - runs to what appears to be a check valve? then to a "T" fitting then thru the firewall on the passenger side.

eldorado1
07-15-04, 04:10 PM
A - Left bank (front) cam cover right (passenger) side
B - PCV valve
C - Evap canister purge valve (port next to electrical connection, right bank cam cover)
D - Power brake booster
E - FPR
F - runs to what appears to be a check valve? then to a "T" fitting then thru the firewall on the passenger side.
Okay, thanks for your help!