: SRP Billet Pedals, 20% off



pedalpusher
02-25-09, 01:15 PM
Hello,
My name is Brian and my Company is SRP. www.srpracing.com
SRP has been specializing in racing pedals since 1995. Our pedals are made to fit your vehicle specifically. You do have to drill holes to mount the pedals. Once installed, they are a part of your car with no chance of coming off. Our pedals are designed for performance enthusiasts, offering much improved heel toe placement and the highest levels of grip.

I’ll give you the most often asked info right here:
$89 for Machined finish, 5pc. set
Satin: +$10
Grid, Block, Cleats: +$50

Instead of doing a group buy (who wants to wait?), I have set up a discount coupon for Cadillac Forum users.
Just enter: cadillacforums while checking out for 20% off.

The Machined finish is our standard finish. These pedals are left the way they come off the cnc machine. They are very bright, but not polished. Satin is our best selling finish. It is an extra $10 over the base price. Both the Machined and Satin are machined from 1/8" billet aluminum. The Grid is our second best selling finish. The Grid, Block, and Cleat finish pedals are machined from 3/16" billet aluminum, which is 50% thicker than the Machined and Satin. This extra thickness is not added for strength, but to allow more surface detail to be added. I've never once heard of one of our pedals bending or breaking. Due to the additional aluminum and much longer machining times, these pedals cost an additional $50 over the base price.

GRID +$50
http://www.srpracing.com/admin/misc_images/c5_grid_closeup-BU.jpg
http://www.srpracing.com/prod_images_blowup/cts-v-grid-thick-BU1.jpg
SATIN +$10 http://www.srpracing.com/admin/misc_images/c5_satin_closeup-BU.jpg
BLOCK +$50
http://www.srpracing.com/admin/misc_images/c5-block-brake-BU.jpg http://www.srpracing.com/prod_images_blowup/cts-thick-block-pbrake-BU1.jpg

After many years of people asking how the grip compares to factory, and me telling them they are great, I finally got around to doing some testing to show just how much grip they do have. Now I can answer with actual numbers, instead of subjective opinion. Below are the results of the testing. Just to clarify, the wet test was NOT done with water, but with Armor All. We wanted to do a worst case scenario type test.

Also, just to clarify, we used to make our Grid pedals with flat tops, instead of pointy tops. After doing this testing we have switched all our Grid pedals to the "Pyramid" pointy top style.

DRY http://www33.instantestore.net/merchant19289/misc_images/PEDAL_TEST_DRY_JPG5.jpg (http://www33.instantestore.net/merchant19289/misc_images/DRY_GRAPH_JPG1.jpg)
WET
http://www33.instantestore.net/merchant19289/misc_images/PEDAL_TEST_WET_JPG1.jpg (http://www33.instantestore.net/merchant19289/misc_images/WET_GRAPH_JPG1.jpg)

Lastly, needless to say, these are made in the USA.
www.srpracing.com

liqidvenom
02-25-09, 07:19 PM
those look great, where do we have to drill holes? Do you happen to have a set of them mounted?

deedubb
02-25-09, 07:29 PM
Where's the website to order?

Silver -V-
02-25-09, 07:36 PM
What a great deal! I had a set mounted on the '04 V I just sold. I will be buying them for the new V with the 20% deal!

http://i374.photobucket.com/albums/oo183/moth-94987/garage028.jpg



http://i374.photobucket.com/albums/oo183/moth-94987/garage010.jpg

pedalpusher
02-25-09, 07:40 PM
[quote=Silver -V-;1787692]What a great deal! I had a set mounted on the '04 V I just sold. I will be buying them for the new V with the 20% deal!


Thank you for posting the pictures. I can't find any that are good enough to post.

Our website is:srpracing.com

UnsafeAtAnySpd
02-25-09, 10:00 PM
Do you have a side by side of the regular versus the satin? Do you know which is the better match to the stock 'aluminum' V trim pieces?

pedalpusher
02-25-09, 10:06 PM
Do you have a side by side of the regular versus the satin? Do you know which is the better match to the stock 'aluminum' V trim pieces?

The standard Machined finish is not a great match for factory silver accent pieces. The Satin and the others have a nicer silver look that does complement the trim in the car.

http://www33.instantestore.net/merchant19289/misc_images/SURFACE2.jpg

UnsafeAtAnySpd
02-25-09, 10:21 PM
Thanks for the quick reply. How long is this deal going to be going on? I want to pick up a set but can't spend the money right now. Also, PM sent regarding another thing.

pedalpusher
02-26-09, 12:05 AM
Thanks for the quick reply. How long is this deal going to be going on? I want to pick up a set but can't spend the money right now. Also, PM sent regarding another thing.

We are a forum sponsor for one month. I will run the discount for the entire time. If things go good, I'll keep on being a sponsor.

Regarding your PM, please shoot me a email so I can reply to it. There is a contact button on our site. The forum did not allow me to reply to your PM.

Brian

UnsafeAtAnySpd
02-26-09, 01:10 AM
Email sent. Thanks.

nxlr8
02-26-09, 01:25 AM
We are a forum sponsor for one month. I will run the discount for the entire time. If things go good, I'll keep on being a sponsor.

So... one month... Feb is almost over, so I'm guessing you mean this deal is good until 3/31/09? Can you confirm?

urbanski
02-26-09, 06:14 AM
The forum did not allow me to reply to your PM.

Brian

fixed

Lord Cadillac
02-26-09, 10:28 AM
fixed
Thank you, Urb.. Welcome SRP Racing... :)

814V
02-27-09, 03:41 AM
wow those are awesome!

jaqalnp
02-27-09, 02:56 PM
JUst ordered some.

pedalpusher
02-27-09, 03:38 PM
JUst ordered some.

Thank you and everyone else that has ordered. As of right now, every order I have received will be shipped out by today.

Brian

pedalpusher
03-02-09, 06:52 PM
We've had quite a bit of interest, and I thank you.

For those that are thinking about it, keep in mind we have a 100% satisfaction guaranteed policy. If you don't like the pedals, you can send them back for a full refund, minus shipping.

We are in our 15th year of specializing in pedals. This is not a side business or just another product line, pedals are what we do.

Brian

shadybx7
03-08-09, 03:18 AM
does any one know how to disassemble the Ebrake pedal to get at some sort of metal pedal face?? the provided self tapping screws just seem to spin

pedalpusher
03-08-09, 01:55 PM
does any one know how to disassemble the Ebrake pedal to get at some sort of metal pedal face?? the provided self tapping screws just seem to spin


I'm sorry you are having trouble. The rubber cover should peel off. I have never done it myself, so I could be wrong. The aluminum Ebrake cover should mount with the 2 longer machine screws and lock nuts, not the self tapping screws. The self tapping screws should be used on the gas and footrest.

Let me know via PM if you don't have all the hardware or there is anything I can do to help.

Brian

UnsafeAtAnySpd
03-08-09, 02:39 PM
I plan to not use the ebrake pedal. Just the other four.

shadybx7
03-08-09, 03:20 PM
I'm sorry you are having trouble. The rubber cover should peel off. I have never done it myself, so I could be wrong. The aluminum Ebrake cover should mount with the 2 longer machine screws and lock nuts, not the self tapping screws. The self tapping screws should be used on the gas and footrest.

Let me know via PM if you don't have all the hardware or there is anything I can do to help.

Brian

Thanks for the quick reply, the ebrake is the only one i'm having trouble with, i ll try prying off the ebrake rubber cover with a puddy knife

BTW The Fit and finish of these SATIN pedals is great!!! they really upgrade the interior and match the brushed :v: finish, my buddy thought these were stock!!

nxlr8
03-08-09, 09:03 PM
Satin ordered... $86.26 shipped... not too shabby

pedalpusher
03-11-09, 11:35 AM
The pictures below are just to show some different angles of the various surface finishes we offer. The pedals shown are not CTS, so they will be slightly different.

BLOCK:
http://www.srpracing.com/admin/misc_images/por-996-block-3-BU.jpg
CLEAT:
http://www.srpracing.com/admin/misc_images/por-996-cleat-2-BU.jpg
CLEAT:
http://www.srpracing.com/admin/misc_images/big-por-996-cleat-3-BU.jpg
GRID:
http://www.srpracing.com/admin/misc_images/tb-brake-grid-BU.jpg

rand49er
03-13-09, 12:36 PM
I plan to not use the ebrake pedal. Just the other four.Tbjs needs an e-brake pedal.

:rofl:

1FASTSS
03-16-09, 01:40 PM
so if you order the Grid set you only get the E-brake/clutch/brake pedal as grid and the others as satin?

pedalpusher
03-16-09, 02:24 PM
so if you order the Grid set you only get the E-brake/clutch/brake pedal as grid and the others as satin?

Here's the deal. The gas pedal needs to be smooth so that your foot will smoothly slide across it. For functionality the footrest can either be smooth or grippy. However, with the smooth gas pedal, I think it looks better to have the footrest match the gas pedal. That is why we offer them that way.

That being said, the pedals are made to order. If you would like the footrest to have the Grid machining just let me know, no extra charge. Same for the gas pedal.

If you would like to do this, just order the Grid set off the website and also send me an email with exactly what you would like.

Brian

1FASTSS
03-16-09, 03:44 PM
Here's the deal. The gas pedal needs to be smooth so that your foot will smoothly slide across it. For functionality the footrest can either be smooth or grippy. However, with the smooth gas pedal, I think it looks better to have the footrest match the gas pedal. That is why we offer them that way.

That being said, the pedals are made to order. If you would like the footrest to have the Grid machining just let me know, no extra charge. Same for the gas pedal.

If you would like to do this, just order the Grid set off the website and also send me an email with exactly what you would like.

Brian

Cool Brian. What's you email? I will be ordering in the next day or 2:thumbsup:

pedalpusher
03-16-09, 04:32 PM
Cool Brian. What's you email? I will be ordering in the next day or 2:thumbsup:

You can use the "contact us" button on the website and I will get it.

pedalpusher
03-17-09, 11:23 AM
I have had a couple questions about pricing, so I just want to make sure it is clear.

The base price for the CTS-V pedals with Machined finish is $89.
Add $10 for the Satin
Add $50 for the Grid, Block, or Cleat finish

Using the discount coupon code: cadillacforums, the pricing is:
Machined: $71.20
Satin: $79.20
Grid, Block, or Cleat: $111.20

Plus shipping

Brian

http://forums.rennlist.com/rennforums/members/pedalpusher-albums-srp-racing-pedals-picture624-usa.bmp

pedalpusher
03-21-09, 03:15 PM
The movie is pretty old at this point, but I thought I'd post this anyway. Our pedals were in the Mustang in the movie "Gone in 60 Seconds". Pretty cool, lots of closeups of some awesome pedals.
http://www.srpracing.com/misc_images/gone_in_60.jpg

http://www.srpracing.com/misc_images/gone_in_60.jpg

pedalpusher
03-23-09, 11:20 AM
Here's a short video of CTS brake and clutch pedals being machined. Obviously, this is just a portion of the machining that gets done to them before they are complete. It's kinda fun to watch.

You might want to turn your volume down before starting.

http://www.youtube.com/watch?v=yMG4QeRKY14

pedalpusher
03-26-09, 11:12 AM
You can use our discount coupon for any pedals on our website, not just CTS pedals. A couple people have discovered this, just thought I would make it clear.

Discount coupon code: cadillacforums

Brian

www.srpracing.com

pedalpusher
04-02-09, 10:59 AM
Grid pedals on a 911.
http://www.cadillacforums.com/forums/picture.php?albumid=606&pictureid=2951
http://www.cadillacforums.com/forums/picture.php?albumid=606&pictureid=2952

Naf
04-13-09, 02:41 AM
Have to admit, added sportiness to the cockpit footwell. Instructions were great for the break and clutch pedal, but it would have been nice if you also had diagrams for gas pedal and E-Brake...

All in all, GREAT BUY, a must for ALL!

stuckey
04-14-09, 02:45 PM
did anyone figure out how to get the ebrake cover off

Naf
04-15-09, 06:01 AM
did anyone figure out how to get the ebrake cover off

I just drilled through till i got through the metal part..Then dabbed a bit of locktight and screwed it in...it was the fastest pedal for me to do...The others, MAN especially the gas pedal...

pedalpusher
04-17-09, 03:44 PM
I sent some pedals off to get anodized and I got them back yesterday. I am very happy with the results. I am going to offer them in both the solid black finish, and the black/silver finish. On the pedals with the silver holes, I am going to try to make them look a little better. We have to re-countersink the holes to get rid of the anodizing, and they didn't end up quite as clean as we'd like. They look good at arms length and would look great installed, but not quite perfect up close.

For pricing, these are going to run $20 extra for the black and $25 for the two-tone. Right now I have a couple sets of the Grid style on the shelf ready to go. Once I get an idea of what people want, or if they even want this at all, I'll try to keep more on the shelf. If I don't have it, it will likely be a couple week turn around time, which I hate, so be patient. If you like these, or not, please let me know. If you'd like to order just shoot a pm or email to check availability. I haven't yet added them to the website, but will do so shortly.

Last, I can't make any guarantee to the finish lasting. This is the thing that has kept me from offering this in the past. Pedals are a wear item. When the raw aluminum wears, it doesn't look bad. When the black anodizing wears, you are going to see bright aluminum shining through. The anodizing is supposed to be harder than the aluminim, so I don't know how long this might take. I just want to be honest and upfront about things.
Brian
http://forums.rennlist.com/rennforums/members/pedalpusher-albums-srp-racing-pedals-picture1092-996-black-and-silver-1.jpg
http://forums.rennlist.com/rennforums/members/pedalpusher-albums-srp-racing-pedals-picture1097-996-grid-black-3.jpg
http://forums.rennlist.com/rennforums/members/pedalpusher-albums-srp-racing-pedals-picture1096-996-grid-black-2.jpg
http://forums.rennlist.com/rennforums/members/pedalpusher-albums-srp-racing-pedals-picture1095-996-grid-black-1.jpg
http://forums.rennlist.com/rennforums/members/pedalpusher-albums-srp-racing-pedals-picture1094-996-black-and-silver-3.jpg
http://forums.rennlist.com/rennforums/members/pedalpusher-albums-srp-racing-pedals-picture1093-996-black-and-silver-2.jpg

stuckey
04-18-09, 01:07 AM
i would love a set of two tone

ccextra1976
04-19-09, 01:32 AM
+2 I want a set of the two toned in the grid pattern!!!! well minus the gas peddal

they will look great with black interior and the little bit of silver will offset the silver trim in interior...

pedalpusher
04-19-09, 07:26 PM
I have added the option Black options to the website. You might want to check with me before ordering to see what I have ready. If I don't have any ready, it might be a couple weeks for us to get some machined and to the anodizer, wait for them to get them done, and then returned to us.

Brian

ccextra1976
05-11-09, 12:13 AM
http://i654.photobucket.com/albums/uu262/05badcad/DSC01246.jpg

2005 V

pedalpusher
05-19-09, 10:40 AM
CTS Block Black/Silver
http://www.cadillacforums.com/forums/picture.php?albumid=606&pictureid=3677
CTS Grid Black/Silver
http://www.cadillacforums.com/forums/picture.php?albumid=606&pictureid=3678

pedalpusher
06-01-09, 11:43 AM
Not CTS, but fun track/pedal pictures anyway.
http://www.srpracing.com/misc_images/Exige_VIR3.JPG
http://www.srpracing.com/misc_images/eliseinstalled6.jpg

pedalpusher
07-10-09, 10:45 AM
Some new designs I've been working on. Grid pedals with "Trim Rings" and Grid on the gas and footrest. The Grid Trim Rings and Grid on the gas and/or footrest are no charge options when you order the Grid surface finish.
http://forums.rennlist.com/rennforums/members/pedalpusher-albums-srp-racing-pedals-2-picture1833-944-grid-trim-ring-bu2.jpg
http://forums.rennlist.com/rennforums/members/pedalpusher-albums-srp-racing-pedals-2-picture1832-944-grid-trim-ring-bu1.jpg

This is a comparison of our standard Grid pedals and the Grid pedals with the Trim Ring option.
http://forums.rennlist.com/rennforums/members/pedalpusher-albums-srp-racing-pedals-2-picture1648-grid-ring1.jpg

stuckey
07-10-09, 01:42 PM
Those look nice!

pedalpusher
07-16-09, 11:07 AM
Porsche 997 Grid pedals with the Grid Trim Rings.
http://forums.rennlist.com/rennforums/members/pedalpusher-albums-srp-racing-pedals-2-picture1758-grid-ring-8.jpg

pedalpusher
07-21-09, 03:15 PM
Pedals with the updated Grid machining on the gas pedal. The pedals match very nice, but the gas pedal has far less grip than the brake pedal, allowing your foot to slide across it properly.

The Grid Trim Rings and the Grid on the Gas and/or Footrest are NO COST OPTIONS.
http://forums.rennlist.com/rennforums/members/pedalpusher-albums-srp-racing-pedals-2-picture2205-flat-grid-gas2-bu.jpg
http://forums.rennlist.com/rennforums/members/pedalpusher-albums-srp-racing-pedals-2-picture2204-flat-grid-gas1-bu.jpg

pedalpusher
07-28-09, 08:30 PM
Black Grid with the Trim Ring and Grid on Gas and Footrest options.
http://forums.rennlist.com/rennforums/members/pedalpusher-albums-srp-racing-pedals-2-picture2331-corolla-ae86-grid-black-silver5.jpg
http://forums.rennlist.com/rennforums/members/pedalpusher-albums-srp-racing-pedals-2-picture2332-corolla-ae86-grid-black-silver1.jpg
http://forums.rennlist.com/rennforums/members/pedalpusher-albums-srp-racing-pedals-2-picture2333-corolla-ae86-grid-black-silver2.jpg

liqidvenom
07-29-09, 01:21 AM
What does the "Black Grid with the Trim Ring and Grid on Gas and Footrest options" run for the three and the ebrake and footrest

stuckey
07-29-09, 05:57 AM
I guess I'll never be satisfied. I got the silver ones first, then the first ever set of black ones, now I want these.

pedalpusher
07-29-09, 12:09 PM
What does the "Black Grid with the Trim Ring and Grid on Gas and Footrest options" run for the three and the ebrake and footrest

Below are the pages of our website that are needed to place the order. I'll just break it down here.

CTS-V 5 piece set: $89
Grid Surface finish: $50
Trim Rings: $0
Grid on Gas & DP: $0
Black Anodized: $20
or
Black and Silver: $25

So, $159 or $164, Retail.
Use the cadillacforums coupon code while checking out for 20% off, $127.20 or $131.20, plus shipping.

http://www.srpracing.com/pd_ctscts-v_2003-2007.cfm
http://www.srpracing.com/cat-pedal-options.cfm

nxlr8
07-29-09, 06:19 PM
Guess that teaches me to jump on the bandwagon early.... I like these better than the original set I bought :-(

HeavyH20
07-31-09, 03:42 AM
I like the black ones, but, with the silver car and blac interior, I really like how the silver ones look.

bneal1022
07-31-09, 11:54 AM
Hey pedal pusher...

I saw this auction on Ebay for billet CTS-V pedals. I like your grooved pedals MUCH more but what I liked from them was the larger floor stomp pad that looks like it bolts through the floor mat. That would be cool if it had you texture options for grip as opposed to the smooth like this auction is offering.

your thoughts? PM me back if you may consider doing this and how much for a complete set with the grooved billet floor mat stomp pad.

http://cgi.ebay.com/ebaymotors/03-07-Cadillac-CTS-V-OEM-Tan-Leather-Suede-Power-Seats_W0QQcmdZViewItemQQ_trksidZp4506Q2ec0Q2em245Q QhashZitem53dc1f4c4fQQitemZ360175324239QQptZMotors Q5fCarQ5fTruckQ5fPartsQ5fAccessoriesQQsalenotsuppo rted

pedalpusher
08-01-09, 02:43 PM
Hey pedal pusher...

I saw this auction on Ebay for billet CTS-V pedals. I like your grooved pedals MUCH more but what I liked from them was the larger floor stomp pad that looks like it bolts through the floor mat. That would be cool if it had you texture options for grip as opposed to the smooth like this auction is offering.

your thoughts? PM me back if you may consider doing this and how much for a complete set with the grooved billet floor mat stomp pad.

http://cgi.ebay.com/ebaymotors/03-07-Cadillac-CTS-V-OEM-Tan-Leather-Suede-Power-Seats_W0QQcmdZViewItemQQ_trksidZp4506Q2ec0Q2em245Q QhashZitem53dc1f4c4fQQitemZ360175324239QQptZMotors Q5fCarQ5fTruckQ5fPartsQ5fAccessoriesQQsalenotsuppo rted

I'm not sure this is what you are referring to, but I think so - heel guards. You can find them on our website at this link: http://www.srpracing.com/pd-heel-guards.cfm They are $59 for the Satin or Brushed and $89 for the Grid.

http://www.srpracing.com/misc_images/heel_guard_mustang4-large.jpg
http://www.srpracing.com/misc_images/heel_guard_contour.jpg
http://www.srpracing.com/misc_images/heel_guard_satin_BU.jpg
http://www.srpracing.com/misc_images/heel_guard_grid2_BU.jpg
http://www.srpracing.com/misc_images/heel_guard_grid_BU.jpg

JD03Cobra
08-13-09, 10:04 AM
Just ordered up the 5 piece silver with grid on all. Thanks for the discount! I will post pictures.

thebigjimsho
08-13-09, 04:22 PM
Tbjs needs an e-brake pedal.

:rofl:
You sunuvabitch! You got away for 5 months with that comment!

thebigjimsho
08-13-09, 04:28 PM
CTS Block Black/Silver
http://www.cadillacforums.com/forums/picture.php?albumid=606&pictureid=3677
CTS Grid Black/Silver
http://www.cadillacforums.com/forums/picture.php?albumid=606&pictureid=3678
Are you using a wider footrest now? I don't know what affiliation you had with AutoVation, if any, but I never liked the footrest that is the same size as the rubber strip in the V...

thebigjimsho
08-13-09, 04:29 PM
Not CTS, but fun track/pedal pictures anyway.
http://www.srpracing.com/misc_images/Exige_VIR3.JPG
http://www.srpracing.com/misc_images/eliseinstalled6.jpg
Oak Tree. VIR. :drool::drool::drool::drool::drool::drool::drool:: drool::drool::drool::drool::drool:

pedalpusher
08-16-09, 08:57 PM
Are you using a wider footrest now? I don't know what affiliation you had with AutoVation, if any, but I never liked the footrest that is the same size as the rubber strip in the V...

That picture is actually an 08 CTS footrest combined with the 04-07 gas pedal.

I've seen some pictures of our pedals installed, and I think I'm going to be changing our footrest to be quite a bit larger. I am thinking that the 08+ CTS footrest is going to be the perfect size for the 04-07 CTS.

I will update this when confirmed.

Brian

thebigjimsho
08-17-09, 01:07 PM
That picture is actually an 08 CTS footrest combined with the 04-07 gas pedal.

I've seen some pictures of our pedals installed, and I think I'm going to be changing our footrest to be quite a bit larger. I am thinking that the 08+ CTS footrest is going to be the perfect size for the 04-07 CTS.

I will update this when confirmed.

Brian
Good stuff!

Lord Cadillac
08-31-09, 04:15 PM
Closed at topic starter's request.