: Shes so purdee and shiney...



MauiV
10-14-08, 10:33 PM
Finally took some pics...

Love the tag on the back of the Maggie:
http://i173.photobucket.com/albums/w52/jdinmaui/Maggiegun003.jpg

Picked up a few bugs:
http://i173.photobucket.com/albums/w52/jdinmaui/Maggiegun002.jpg

http://i173.photobucket.com/albums/w52/jdinmaui/Maggiegun001.jpg



I am trying to find a piece of black 3.75" hose to replace the blue one that I have rigged up now.

nxlr8
10-14-08, 10:46 PM
What's the tag say?

tlsmeds
10-14-08, 10:49 PM
It certainly is purdy! Now tell us how it runs!:bouncy:

CTSV_510
10-14-08, 10:54 PM
"For Off-road Use Only"

Boooo.....lose the sticker! Mine doesn't have one. Actually, now that I think about it, I think it came with one but I tossed it...

She is nice any shiny though! :thumbsup:

814V
10-14-08, 10:56 PM
i want one bad.. maybe when santa comes

Luna.
10-14-08, 11:23 PM
I am trying to find a piece of black 3.75" hose to replace the blue one that I have rigged up now.


One of the craziest things Magnason DIDN'T provide was a hump-hose to connect the air cleaner to the supercharger on at least ONE, if not both, connections.

With the "direct-connection" most have going on, it's very common to start loosening screws on the air cleaner connection side, as their seldom is enough play to make up for engine flex.

I purchased a few hump hoses and they have worked beautifully. :cool2:

MauiV
10-14-08, 11:34 PM
Now tell us how it runs!:bouncy:


Like a BEAST. I havent really got on it in 1st or 2nd. Im too worried about blowing up the rear and after the Maggie I dont have the cast to replace a diff right now. I did turn the TC off on just hit the gas hard once and I went NO WHERE. I hit the rev limiter in 2nd and didnt move till 3rd gear.

Mustang Dyno, 6th pull of the morning with IAT of 190*

http://i173.photobucket.com/albums/w52/jdinmaui/Dyno.jpg

4th gear pull from 40-120 is INSANE.

My wifes first quote was..."It sounds like an airplane in here"

V-Love
10-15-08, 12:27 AM
Hold it a little longer in 4th. She has more to give.

heavymetals
10-15-08, 12:47 AM
You can reroute the fuel crossover to go underneath the pulley bracket and show it off more.

Looks very nice.

Maggied V's are a hoot.

Why do you think the 09 comes with one?

Twitch
10-15-08, 10:30 AM
Your tuner was probably right when he said you can get 450hp when its cooler. 190 IAT is pretty high. With my Magnuson tune, at 140 IAT, timing was 16.0-16.5. When the IAT got down to the low 120s, timing was at 18. I think that's the max.


Didn't know the fuel line could go under the pully bracket. I have mine over it. Under the air tube.

onebadcad
10-15-08, 10:44 AM
Nice, glad you are enjoying it, have your tuner aim for 450rwhp.
Here are a couple of old pics before the 90mm install, but it shows how clean the install can be:

http://i167.photobucket.com/albums/u150/onebadcad/Darrens2cars009.jpg

http://i167.photobucket.com/albums/u150/onebadcad/Darrens2cars008.jpg

artimus
10-15-08, 11:09 AM
oooohh very nice! I want one!

MauiV
10-15-08, 10:42 PM
Nice, glad you are enjoying it, have your tuner aim for 450rwhp.
Here are a couple of old pics before the 90mm install, but it shows how clean the install can be:

http://i167.photobucket.com/albums/u150/onebadcad/Darrens2cars009.jpg

http://i167.photobucket.com/albums/u150/onebadcad/Darrens2cars008.jpg

Is there any special routing or bracketing needed to run those 2 lines under the intake?

onebadcad
10-16-08, 01:23 PM
Did not do my install, but IIRC there were no additional parts needed to route the lines. Heavymetals looks similar, so he needs to advise, as I know he installed his.

csp3000
10-16-08, 01:36 PM
Finally took some pics...

Love the tag on the back of the Maggie:
http://i173.photobucket.com/albums/w52/jdinmaui/Maggiegun003.jpg

Picked up a few bugs:
http://i173.photobucket.com/albums/w52/jdinmaui/Maggiegun002.jpg

http://i173.photobucket.com/albums/w52/jdinmaui/Maggiegun001.jpg



I am trying to find a piece of black 3.75" hose to replace the blue one that I have rigged up now.

I hope you have many happy days with her on your V. I am happy my Maggie went to a good home...:thumbsup:

Man I am sad I so miss my V....:alchi:

CadiBlk
10-16-08, 01:58 PM
Man I am sad I so miss my V....:alchi:

I feel sorry for you until I read the last line of your sig

"2009 loaded black on black 6sp Auto CTS V coming to my house in Dec..."

onebadcad
10-16-08, 02:45 PM
I feel sorry for you until I read the last line of your sig

"2009 loaded black on black 6sp Auto CTS V coming to my house in Dec..."

Might be delivered a few weeks into the New Year, as he has asked me to pick it up from Cadillac Tony, and I plan on making a 'few stops' before I get it to Chris:cool2:!