: 2009-2015 Cadillac CTS-V Performance Mods



Pages : [1] 2 3 4 5 6 7 8 9 10 11 12 13 14

  1. what rims fit the rear of a cts v coupe for drag radials?
  2. What MODS should I get
  3. Are there any worth the money plug and play tunes that wont void warranty?
  4. kPE Tune Special for the week
  5. Anyone know what the stock coil Packs Specifications are?
  6. ID 1000 install
  7. Fitting the Airaid intake..........some issues
  8. CAI cheaper options?????????????
  9. New aFe intake coming end of June.
  10. Someone here knows the answer! 6.2 swap into RHD CTS in NZ, need parts help.
  11. need info on ls3 parts please
  12. Does a Pulley Mod Nullify the Revised Supercharger Warranty?
  13. 600hp currently, needs injectors. should I add this 2.55 kit I have in garage? coolin
  14. Did we mess up our suspension?
  15. Cts-V 1/4 mile track time stock
  16. Engine light on
  17. LT4 In 2010 CTS-V Sedan?
  18. Just got my '14 V Raven Sedan and thinking Paddle Shifters any ideas?
  19. What a blast.This car moves out really well.
  20. CTSV Center Gauge from NORCAL SS
  21. Cts-v mids pulley advise
  22. Newbie to thee V scene. Vitness Throttle Control & InTune i2
  23. Just getting into a cts v coupe.
  24. Tuner Shop Proposal
  25. Cold Air Intake suggestion
  26. Question about tire pressure
  27. Need Advice - pulley upgrade advice & splitter/diffuser options
  28. Long Tube Headers w/ Factory exhaust?
  29. 2011 CTS-V Coupe Exhaust
  30. Looking for airaid intake in chicago area
  31. Tire options - RE11 or ExtremeContact DW?
  32. KPE & Spring Hand in Hand
  33. Best Heat Exchanger Kit???
  34. Metco Pulley Experience - Unreliable, Never Again
  35. s/c pulley got loose
  36. Multi-year power upgrade plan
  37. My front rotors changed color in one place?
  38. Pulley no tune
  39. Recommendation on wheels and tires (brand, size, vendor) for HPDE track days
  40. KPE Sport exhaust opinions?
  41. 427 LSA stroker build on Engine Power Tv
  42. Advice for Performance work Tulsa area
  43. KPE CTS-V Friends
  44. 2013 cts-v i just got
  45. Looking to buy airaid coldair intake
  46. Engine goes lean when hard downshift
  47. Carbon Fiber Special
  48. Supercharger pulley kit
  49. New 2012 CTS-V coupe owner
  50. Exhaust options - keeping stock exhaust intact?
  51. January special--
  52. KPE Year End Sale
  53. surging idle ON DECELERATION
  54. Brembo Rotors
  55. Rear end drain.
  56. Air Raid (Airaid) Cold Intake Box
  57. Hawk DTC racing brake pads on sale!
  58. Help me pull the trigger/pulley and tune...
  59. Eibach Lowering Springs Question
  60. I finally broke 1000whp
  61. Question About Eibach Lowering Springs
  62. Off to SEMA in morning. I posted some TV clips from the season to date.
  63. Finally got my diff cooler setup TRACK READY!
  64. Affect on Position Angle Sensors after lowering
  65. Cut out catalytic converters and reprogram?
  66. Replacing just the mufflers?
  67. Exhaust headers
  68. UUC Short Shifter
  69. drag setup advice
  70. 9.55 crank pulley install- additional parts needed and difficulty?
  71. 2012 CTS V Muffler Delete with some questions
  72. Vengeance racing
  73. Supercharger max RPM, pulley ratios discussion
  74. Mod friendly dealer in Charlotte area
  75. Headers, no tune
  76. Considering pulley and tune for 09 ctsv. Need advice
  77. Air Raid (Airaid) cold air intake
  78. Corsa intake , my opinion ...
  79. Pro guide to tire and wheel fitment
  80. Auto door lock when driving
  81. P015B Code After Straight Pipes Install
  82. Busy day tomorrow - Diff cooler and ZL1 instsll
  83. Smog compliance
  84. 09,10 trans tune versus 11 and later
  85. Sooo, I can't stay stock. I tried. Pulley Time
  86. New side blades installed.....love 'em! Best $300 ever!
  87. New REAL racing tow hooks are coming soon!
  88. Short-Shifter
  89. Short-Shifter
  90. Aeroforce Gauges on Sale with Free Shipping! - Lots of Accessories!
  91. aeroforce gauge...who has one?
  92. Next Mod + 1/4 mile time?
  93. Went to the dyno
  94. New to ctsv coupe
  95. Kooks Summer Sale @ MarylandSpeed! Free Coating or Save More!
  96. Which Heat exchanger?
  97. Long island / Nearby Performance shops for Installs and Tuning
  98. Anyone know what cam wait4me was installing with his 600whp package?
  99. Post boost Meth one jet only, love it
  100. Kit/package to beat Zr1
  101. What is my first mod on my V2 fellas?
  102. New brakes = ready for VIR
  103. Cutouts Question
  104. Kooks Summer Sale! Free Ceramic Coating or SAVE MORE @ MarylandSpeed!
  105. CTS-V Stock SC Pulley Bore
  106. CTSV Borla X Pipe
  107. How big of a cam???
  108. Renick Engineering Lowering Springs + yellow calipers: Reviews and pics!
  109. '13 V coupe pinging
  110. Need Pulley advice!
  111. GM OE Diff Cooler - They DO Exist!
  112. Stainless Works presents The Auburn Auto+Aviation Show Benefit for MS
  113. What is the best discs/ pads setup to replace stock front brakes?
  114. 613RWHP...and not going anywhere
  115. 305/35/18 in Rear of 09+ CTSV Sedan?
  116. CTS-V versus CHALLENGER HELLCAT vid
  117. Stupid question about exhaust and tune
  118. One day sale on everything!!! Breaking sales records!!!
  119. 275/40/18 up front?
  120. Toyo Proxes R888 315/30ZR20
  121. Monster clutches tax sale!!!
  122. South Florida Performance Shop
  123. Anticipated Heat Soak
  124. Do I need to the Intercooler Hooked up to run Motor?
  125. CTS-V Coupe Exhaust - Looking at B&B and Borla - Puget Sound Area
  126. New 6MT CTS-V V2 1/4 Mile ET Record - 10.09 at 150mph!
  127. Kooks Long Tube Headers Install instructions with Pics?
  128. Stainless works vs Kooks?!
  129. which springs to get... d3 with rods or the eibach????
  130. 2012 V Sedan, Billy Boat or Borla
  131. Looking for more, I have the itch
  132. Fast Motorsports Still Around?
  133. Airaid problem
  134. What to do with the Hideous yellow Airaid logo?
  135. Blower Height
  136. QTP Cut-outs... 3-days later and I'm still grinning like an idiot
  137. Throttle body port type
  138. Norcal question
  139. Any ideas on the set up ?
  140. Headers with warranty? Corsa sedan axle back on a wagon?
  141. Sideswipe CAI Deflector
  142. Can I change my Auto trans. to a full Manual trans on my V Sedan?
  143. Lower pulley question..
  144. Tuned + 9.0 LSA Boost pulley kit
  145. Good V tuner near San Jose, Ca
  146. My '09 Cad CTS-V:
  147. Best gear ratio differential for 1/4 mile
  148. SC Catch Can
  149. Cold Air Dam Intake System for Cadillac CTS-V
  150. Street-Strip drag radials
  151. What kind of results can I expect from a wait4meperformance tune?
  152. Creative Steel V2 Adjustable Short Shifter
  153. 2016 CTS-V auto Transmission in 2009 V possible?
  154. 1,216whp/1,078wtq CTS-V Dyno Video
  155. Horsepower upgrades
  156. High performance tire options
  157. Axle-back exhaust recommendations
  158. Best Deals on Exhaust @ MarylandSpeed- (Borla, Corsa, B&B, Kooks, Magnaflow, SW etc)
  159. Just Bought 2011 CTSV ... Known Issues? Fixes? Recalls?
  160. Billy Boat high flow catted pipes install
  161. Damn D3 Research & Design did it again
  162. Twin turbo kit for Gen 2 CTS-V
  163. Kooks Holiday Sale- 15% off + free coating stage 8 bolts - Beat the price increase!
  164. KPE OE Location Upgraded Heat Exchanger - Twice the cooling surface area!! On Sale.
  165. What CAI to buy ..and best price
  166. Rear End Issues
  167. Anyone know if a 19x12" Corvette wheel will fit on the Rear of a Coupe?
  168. Wanted: stock V2 s/c lid
  169. dyno tuning in Toronto
  170. What 60 ft times should I expect with NITTO NT05 305x35x19
  171. MarylandSpeed Black Friday through Cyber Monday - The Sale of all Sales is Here!
  172. BFGoodrich G-force Rival
  173. BLACK FRIDAY SALE ON KPE STAINLESS CTS-V CAT-Back Systems
  174. is an airaid okay to use in winter
  175. Palmer Performance Dash Logic now for CTS-V! Intro Price
  176. Methanol or methanol - water combination as a RWHP enhancer?
  177. Calling out D3 or customers that did D3 upgraded blowers
  178. For your reading pleasure:
  179. Ported throttle bodies
  180. Installed an Airaid CAI, and Borla Full Catback..Question on safety without a tune
  181. Looking to upgrade to drilled and slotted rotors on all four corners, help?
  182. Kansas City tuners?
  183. Just bought cts-v with mods
  184. Exhaust question
  185. Front sway bars
  186. No threads for installing rear tow eye!
  187. Dynoed car with current mods...injectors maxed out
  188. Picture of what you do to tires before replacing them
  189. Full Exhaust is Complete!
  190. Fastest CTS-V at the Texas Mile
  191. 750whp/715wtq - Finished up the first stage of my build on my '09 6MT
  192. Replace Rotors?
  193. Anybody running the 18x9.5" Enkei Raijin for track set-ups?
  194. Stainless Works Headers
  195. Magnaflow catback owners...impressions?
  196. Last upgrades going on next week
  197. cat back or axel back
  198. Another wheel question - TPMS sensors needed for track use?
  199. Polyurethane Driveshaft Carrier Unit
  200. Zr1 heads on LSA motor?
  201. wheel and tire question
  202. Front camber question
  203. SW Pink Supporting Breast Cancer Awareness
  204. Factory stock superchargers still available from either GM or Magnuson?
  205. Ported throttle body dyno results?
  206. new exhaust
  207. Coupe exhaust Q's (headers, midpipe, cutouts)
  208. Will a CTSV coupe OEM catback exhaust fit on a CTS 3.6L
  209. Pennzoil new synthetic
  210. Car is starting up funny
  211. Exhaust cutout concerns
  212. Stainlessworks or Borla?
  213. KPE Premier ANGLE TIP Loud Mouth Stainless Cat back $1895!!! WOW
  214. 2009+ Cadillac CTSV Sway Bar Kit
  215. Does Airaid void powertrain warranty
  216. Broad handling question
  217. Borla cat-back vs axle-back - specific question.
  218. Recommendations CA legal X-PIPES for a 11 V sedan?
  219. D3 Lowering Springs!!!
  220. Stainless Works CTS-V Headers & Exhaust
  221. 2011 cts-v heavily modded, problem with stability control
  222. Looking at used CTSV that is heavily modded
  223. Airaid on 2011 cts v coupe
  224. High performance brake linings
  225. *Shocking: Performance Distributors’ SOS LSA Coil Packs!!
  226. Is there an overview for LSA fuel tuning? Car stumbles after the new 2.55 pulley.
  227. Injectors ID850
  228. Airaid install ground wire fender mount
  229. Rear Tire Size
  230. which cam?? need help
  231. ZL1 lid milling
  232. Airaid install gone awry
  233. Got my Stainless works exhaust installed
  234. Tuner in the northern california area!
  235. Full customize cylinder block and heads
  236. $50 Buck Airaid Intake Rebate Thru Sept
  237. Potential track wheel setup?
  238. Cadzilla Comes to LIFE!
  239. Engiine coolant gets up to 226* before fans comes on!
  240. boost and valve train mod questions
  241. Floatng valves
  242. Making lsa into ls9.
  243. Best Deals on Exhaust @ MarylandSpeed- (Borla, Corsa, B&B, Kooks, Magnaflow, SW etc)
  244. Big Savings on Kooks Headers! Free Ceramic Coating or Save More!
  245. widest tire on a coupe rear wheel
  246. So what do I need to install the ZL1 lid? Got Lid, gasket, and one OEM hose…..
  247. K&N air filter question on new V.
  248. Need some help Re: upper pulley
  249. 180 Degree Headers: Discussion.
  250. DSC going crazy after installing Michelin Pilot SS