Hey Guys,
With all the LED talk going on here lately, i've decided to do a thread on converting your Escalade to LED.
Fist off, let me just say i consider myself an 'Amateur expert' on automotive lighting. I've converted 4 cars to LED, including my Escalade.
All the LED bulbs the escalade requires are available from this website:
www.superbrightleds.com
Below you will find the amount of bulbs and the direct link to the specs and a part number so you can cross reference when you order. Remember to get WHITE!
2 of these ----------->
http://superbrightleds.com/specs/744x-xHP3.htm (Part number: 7440-xHP3)
8 of these ----------->
http://superbrightleds.com/specs/bulb_specs.htm (Part number: WLED-WHP)
6 of these ----------->
http://superbrightleds.com/festoon.html (Part number: 42mm 4210-xWHP6)
Here is a breakdown of the bulbs:
7440 - Reverse lights (2)
194/168 - Head lights (2) Front doors panels (2) Under sideview mirrors (2) Rear License plate lights (2)
Festoon - Rear dome (2) Middle Dome (2) Front Map (2)
MAKE SURE YOU BUY WHITE BULBS - DO NOT BUY BLUE. THE WHITE BULBS LOOK BLUE.
If you need any help, PM or email me, or post in this thread.
Thanks,
Marco