Re: 2004 ESV cluster issues
I would get another computer board that works, unless you know how to solder. If you know how to solder then just match the light up from eBay and replace them. I purchased some led's and reconnected the dash and made sure they came on before soldering them to the board, thus my dash is now all LED and bright. I see you have all of the older stepper motors as well. Order them from eBay and replace them as well as they will all soon go out( the new motors should all be black). I just replaced 6 of mind this weekend in about 20 mins. No reprogramming needed. Just youtube that video, follow his instructions there, easy job. The alarm looks like a best buy job. If you can match the wires up if it works then change it out if not go to a professional, let them remove it. It may have a starter kill and if you don't reconnect the starter wires your truck will not start. I hope this has helped you out, if not send me a message and I'll go into detail for you.