2000 escalade stock ride height help!!!

OTHCustoms · #1 (**permalink**) 10-29-09, 08:19 PM

maybe 1 of you guys who has a 1999-2000 escalade or any1 else can help me. im adding air helper springs to my leaf springs. my leafs are tired and sagging. and the other day i connected my trailer with my race car and it went down really low. so now im reading the instructions for the air helper springs and it says to measure the stock ride height. idk what mine is cause my truck sags slightly with no load. any1 that has this truck maybe you have better suspension than me can u take a measurement for me? or does anyone actually know what the stock ride height may be? thanks

CEPMAN · #2 (**permalink**) 10-29-09, 09:35 PM

I used to have one, but I don't have any idea about stock height. What you can do though is get a jack and jack up the back of the vehicle until it is at a level that you feel is the stock level. You wouldn't be lifting the vehicle off of the ground or anything, just removing some of the sag with the help of the jack. Make sure though that you jack the actual vehicle, and not the wheels or any of the suspension parts.