Cadillac Owners Forum banner

'06 ABS Issue...

1K views 1 reply 2 participants last post by  Superjim 
#1 ·
The ABS was pulsing at slow speeds when braking. No code, no message in the information center.

One by one pulled the connectors. When we pulled the connector from one of the rear hubs the pulsating stopped. We then had a service stability system, service traction control message, and an ABS light, which was understandable.

Replace the hub with the bad wheel speed sensor. Pulsating ABS stopped, but messages and light are still on. Still no codes.

Did I get a defective hub or am I missing something else?

Thanks!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top