1985-1992 Fleetwood, 1993 Sixty Special, All FWD Forum Discussion, Grille question in Past Cadillac Vehicle Discussion; Does anyone know what years grills will fit other years. What I mean is usually a grill from say 1985 ...
- 09-10-03 08:34 PM #1
Does anyone know what years grills will fit other years. What I mean is usually a grill from say 1985 will fit on 1984 - 1987 models.
I'm trying to determine what other years will fit on my 92 FWD.
- 09-11-03 01:30 PM #2
Does anyone know where I could find an answer?
- 09-11-03 01:44 PM #3
Re: Grille question
Your local junkyard will have an interchange book that tells what years/models any certain part fits.
- 09-12-03 09:42 PM #4
80,81,82,83,84,85,86,87,88,89,90,91,92 interchange although the styles are just a bit different. Hell, Cadillac in 87 went BACK and started installing the 81 grilles again!
77,78,79 interchange, again all 3 have slightly different styles but bolt up fine.
75,76 interchange. That's as far as I can remember without pulling out some old books.
- 09-14-03 05:18 AM #5
Re: GrilleOriginally Posted by ssstealth
- 09-14-03 10:43 AM #6
Let me clarify that my grille interchange comments apply to the rear wheel drive Fleetwoods and DeVilles, not frront drive units.
FWD = Fleetwood?
FWD = Front Wheel Drive?
sorry if any confusion.
- 09-14-03 08:56 PM #7
I think he means '92 Front wheel drive Deville.
I believe '91-93 will fit your car.
Anything other then that....
- 09-18-03 11:32 AM #8
Re: Grille questionOriginally Posted by Andrew60SP
Thanks everyone for the replies.
I like the "classic" look with the fake rolls type grille. I saw one on EBay for $40 of an 89 or 90.
Turned out to be about 31" long. 91-93 FWD devilles need about a 34" grille.
Too bad. If you like ithe look these things usually go for lots more.
Alltrade Trades Pro - Angle Grinder
Angle Grinder - 4-1/2 Inch Angle Grinder; Powerful 4.2A Motor; Spindle Lock For Quick And Easy Wheel Changes; 12,000 RPM No-Load Speed; 5/8 Inch x 11 TPI Spindle; Includes Grinding Wheel And WrenchPrice: 31.99 USD
PowerTorque Tools - Magnetic Extension Bar Set
Magnetic Extension Bar Set - 3 PiecePrice: 6.99 USD
UltraSteel - Magnetic Nut Driver Set
Magnetic Nut Driver Set - Metric; 9 PiecesPrice: 4.99 USD