auto level troubleshooting

jas386 · #1 (**permalink**) 03-30-07, 03:32 AM

new fuse, new relay. still no power to compressor. its not blowing the fuse or relay.. so maybe im missing something.

and i have a few questions for those who know.

What switch makes the "Auto-Leveling" light come on?

on the compressor there is a wiring harness with 4 wires. 1 black, 1 Green Stripe, 2 Purple stripe. Which of these would i jumper to the battery to test the compressor?

sureshot · #2 (**permalink**) 03-30-07, 03:49 PM

After talking with two mechanics who have worked on the ride height control system, they both said either ignore the message, or replace the whole system.
It seems like after it gets over 10 years old, the whole system wears out.
You might try spraying some CRC QD contact cleaner into the sensor on the left rear. That helped 94 Concours some.