Cadillac CTS-V Series Forum - 2009+Forum specifically for discussions regarding the fastest v8 production sedan in the world - the 2009 Cadillac CTS-V with 556 horsepower.
Cadillac Forums: W4m Parts for the 2009 CTSV list.
To make it simple. Here is an update of most parts we sell right now for your V.
Hi guys, Just to keep you updated.
We have blower crank pulley upgrades now for your 09 V
There are 2 different kits.
One is $820 shipped.
It includes belt,new harmonic balancer, your choice of 5% or 10% rings for more boost, and a new balancer bolt and bolts for the ring.
OR we have an upgraded one,
For $920, shipped.
It includes a top of the line harmonic balancer, and includes the ability to use several different boost rings, which gives you alot more fine tuning boost levels.
We also have heat exchanger upgrades for $400 that increase the stock cooling intercooler capacity and allows the intake air temps to stay cooler for longer periods of time.
We also have handhelds still for only $400 that hold 3 tunes, and include transmission programming.
We have Upper pulleys that are only $150. They are made to look like stock and retain the factory safety clip on the end to look stock.
We have 2 versions of cold air kits,
$250 buys the one that still uses the stock box, but includes a k&n filter.
$380 buys the one that is a full change and eliminates the stock box. All 4 inch.
Guys that want to upgrade the one they have to the full one, im going to have to charge $200 for the remaining parts including the new huge cone filter and tubes..
We also have thermostats that are 160 degrees for only $35
We have DVD unlockers for $310 shipped that make it so you have full dvd, and navigation while driving. Address inputs, ect....
We have 90mm throttlebodies for only $400. It ups the stock size for more power under the curve.
We have 2 exhaust kit versions.
One is a partial kit that just eliminates the stock crimped system that is very restrictive but retains the stock mufflers. They are only $800. plus shipping. Sound is near stock, but adds horsepower from removing the restrictions..
Or we have the full kit that is only $1000 and is a cat back to 4 inch tips with no mufflers. It makes the V sound good AND adds 18hp
Also for the guys that dont like the grinding noise/knock noise at idle that the stock cars have, we have a part that you put in the supercharger that gets rid of that noise for only $77 bucks.
It is best to call with any questions. Emails take a little longer to get to due to the volume we are getting. 300+ a day i just cant answer them all......
Quality Car Tuning, dyno work, engine building, ect.. You need it done, we do it..
574-267-3630 Jessebubb@yahoo.com
$320 shipped for e38, e67 computers fully tuned ready to drop in your caddy. "Brand new cores"
$160 shipped for p59 "2004-2005 ls6 ctsv"
EFILive software for your ride, Call for price.
We tune Dodge, Ford, and chevy vehicles 1996 up.
For those of us that have the first part of the intake tube, is it 4" as well. So the rest will just mate right up to it with the appropriate coupler?
Also, this $77 part for the supercharger.... could you elaborate on it and is this a do it yourself install, or take it somewhere to have it done. Does this replace the fragile part in it that wears down? Or is that something different?
One last question... what are the boost increases for the 5% and 10% rings?
thanks,
Mark
Last edited by musclesbmf; 06-03-09 at 03:55 PM.
Reason: added more text
The aluminum looking dampner is the top of the line version. It has less rotating mass than the black one and ALOT more choices on boost levels that you want.
The cold air assembly as shown in the pictures is what has been shipped to everyone that ordered them.
For reference, the Filter is HUGE. It is 4 inch inlet, and is almost a foot long.
As for throttlebody, The easier the blower can breath, the better. Especially when you up the boost like people are wanting to do.
As for the horsepower gained on the full airbox, It is the MAXIMUM you can possibly gain. There is 0, yes 0 negitive pressure at wide open throttle even at 600 horsepower so there is ZERO loss in horsepower. You also cant make any more horsepower with any other form as there is just nothing more you can do for added airflow. Where i have it, if the customer chooses, he can even extend the filter down thru the hole with a 4 inch pipe and attach the filter element down to the bumper area if you really want.. I have tested and tested it, and it works VERY well.
It looks dirty, but the maf housing is VERY high quality aluminum and is slightly polished, You could make it a mirror with about 2 minutes and some steel wool and some metal polish..
Sorry, with more playing around today with ring sizes, Every half inch adds about 2 psi. With a 9 inch ring, you are close to 13psi, which is equiv to the 2.55 upper pulley.
When will the second half of the intake kit be available to ship?
SG
__________________ DR. V-TWIN, INC.
4852 VAN NUYS BLVD.
SHERMAN OAKS, CA 91403
888-DR-V-TWIN TOLL FREE
818-501-TWIN (8946) LOCAL
818-981-TWIN (8946) FAX WWW.DRVTWIN.COM INFO@DRVTWIN.COM
I'm an international customer, currently temperatures around here can reach 50 degrees Celsius I REALLY need almost all the stuff on that list... would it be possible to get a 170 t-stat instead of a 160?
Sorry, with more playing around today with ring sizes, Every half inch adds about 2 psi. With a 9 inch ring, you are close to 13psi, which is equiv to the 2.55 upper pulley.
So is the 9 inch ring the biggest? Do you have 9.5" or 10" rings? We're all waiting with baited breath...
I REALLY need almost all the stuff on that list... would it be possible to get a 170 t-stat instead of a 160?
