Visor plaques

BillM · #1 (**permalink**) 02-18-08, 08:26 PM

My last car was a Chry 300M Special. I found nicely made plaques ( covers) to put over the ugly yellow safety stickers on the visors. They were brushed alum looking with the Chry logo engraved into them. Heres a link showing them... http://www.ptwarehouse.com/accessori...r.htm#chrysler

I searched around the forum but didn't find anything. Has anyone seen this for Caddy's

PygmySurfer · #2 (**permalink**) 02-18-08, 09:04 PM

Quote:

Originally Posted by BillM

My last car was a Chry 300M Special. I found nicely made plaques ( covers) to put over the ugly yellow safety stickers on the visors. They were brushed alum looking with the Chry logo engraved into them. Heres a link showing them... http://www.ptwarehouse.com/accessori...r.htm#chrysler

I searched around the forum but didn't find anything. Has anyone seen this for Caddy's

Instead of covering the stickers you should be able to remove them pretty easily. Just warm them up with a hair dryer.

proexpert · #3 (**permalink**) 02-18-08, 09:09 PM

Has anyone successfully removed these from a 2008 CTS?

BillM · #4 (**permalink**) 02-18-08, 09:59 PM

Quote:

Originally Posted by PygmySurfer

Instead of covering the stickers you should be able to remove them pretty easily. Just warm them up with a hair dryer.

I haven't tried this on my CTS, but the stickers on the 300m were fused into the fabric. Those safety stickers weren't supposed to come off.... ever!

Zymurgy · #5 (**permalink**) 02-18-08, 10:59 PM

Try C6DecalDesigns. While he started with Corvette (C6) stickers, he has expanded to C5 and other car makes. The link shows an example of a Cadillac crest logo. Whatever you want, he can do it for you.

davidaugust111 · #6 (**permalink**) 02-19-08, 07:58 PM

I peeled mine off easily with a hair dryer. It leaves an adhesive "shadow", but it FAR less obnoxious than the stickers.

auraph · #7 (**permalink**) 02-19-08, 08:23 PM

Also removed mine as did DavidAugus111. It took some time for mine to heat up enough to start a good "peel" but then it came off easily.

calcustom · #8 (**permalink**) 02-27-08, 09:17 PM

Has anyone sucessfully removed the left over adhesive after removing the yellow warning labels, and if so what did you use?

Southern · #9 (**permalink**) 05-04-08, 03:28 PM

Here's another way to approach the problem.

You "could" put a Cadiilac seal there........

http://www.c6decaldesigns.com/Page2.htm

gm_eng · #10 (**permalink**) 05-04-08, 03:44 PM

I took mine off with a hair dryer. Had to heat them up pretty good to get them loose. To get the adhesive off I used a product called Goo Gone. Worked good.