hey guys i just recently bought a 2004 cts but it doesnt have hid's i'm wanting to put a kit on it (looking at sharphid.com with DDM Ultra Slim Ballast)
how hard is installation?any mods that i have to do?anybody have step by step instructions?also where do i get a kit for the fogs for hid as well.thanks
cool bumper needs to come off anyways for the v bumper swap,what im concerned about is that i heard u have to cut or drill trhough something and might cause condensation,is that right?what kit are u all using for fogs?will i have any "flicker" issues?
the kit i bought from VVME, i had to drill a hole in the cap that covers the stock bulbs. It's hard to explain. there is a large plastic cap that covers the stock bulb. I just drilled a series of holes in a circular area and popped out the section with a screwdriver. the wire harness has a rubber grommet on it. It's really not a bad job once you get in there. Took me a few hours all the way around
I have that 35W DDM Slim Ballast kit in my lowbeams.
What I did is drill a 1" hole on the dust cap. 1" makes the rubber thing that comes with these kits fit PERFECTLY. I had some pics of what it looks like somewhere, but I am too lazy to search for them. Good kit, very slim, fits in stock location perfectly too.
awesome,i was looking for something that would fit on stock location.any problems with the lights flickering?did u buy the hid wiring harness thats sold separately? this is a quote from their site
"The battery harness is still required if your car has daytime running lights or has wiring of insufficient size (typically in Hondas and Mazdas) to power the HID kit" do i need to purchase it?thanks
