Fog and side marker lens *Group Buy*

[nickc50310]

Originally Posted by AmerLux

To add something to this thread...

The install process is well documented and not for everyone (including me) I bought my WW's almost a year ago and the "oven/apoxy" technique is whats holdin' me back.

Someone who is comfortable with the process should offer the service, as im sure there will be lots of demand. Just a thought.

It is a pain in the ass. I would do it but not for under $100.

If anyone wants me to do theirs I charge $100.

[AmerLux]

Originally Posted by iwa100

sometimes even paint the inside of the headlamps. I was thinking about trying it with cts headlights to get them to match the car...i think it would look pretty sweet personally.

You figure out a way to do this successfully I'm in and your in the $$$$ who here wouldn't want that done? Should have come that way from the factory!

[nopi08]

1. LastOneLeft
2. pryce5
3. iwa100
4. CTSV_510
5. Nopi08
6.
7.
8.
9.
10.

[iwa100]

Originally Posted by AmerLux

You figure out a way to do this successfully I'm in and your in the $$$$ who here wouldn't want that done? Should have come that way from the factory!

I said the exact same thing. Hopefully I can find some time this week to pop off one of the headlamps and check it out. shouldn't be a problem though. i've done it with other headlamps before...shouldn't be any different with these.

[the cadillac kid]

^^ ahh but it is

[se7enone8ight]

1. LastOneLeft
2. pryce5
3. iwa100
4. CTSV_510
5. Nopi08
6. se7enone8ight
7.
8.
9.
10.

... the advance exchange is actually a good idea ... look into it and lemme know, i wouldn't mind spending a little more for the convience

[onyx]

1. LastOneLeft
2. pryce5
3. iwa100
4. CTSV_510
5. Nopi08
6. se7enone8ight
7. onyx
8.
9.
10.

i'm down.

[mrw8]

1. LastOneLeft
2. pryce5
3. iwa100
4. CTSV_510
5. Nopi08
6. se7enone8ight
7. onyx
8.mrw8 (2 sets) Clear
9.
10.

[petronm2000]

1. LastOneLeft
2. pryce5
3. iwa100
4. CTSV_510
5. Nopi08
6. se7enone8ight
7. onyx
8. mrw8 (2 sets) clear
9. petronm2000
10.

What type of resin will the lenses be made from?

I have lots of experience assembling products made of different types of plastics, I installed the set from WW on my car and will do these for a friend. The most important thing is to make sure you let the epoxy cure. The cure time on packaging is a min. in ideal conditions. Also, since the lens must be formed to fit a curve, install the lens in three steps at the major stress points. Install and let the epoxy cure completely before moving on to the next point. As for lens removal, there is very little risk in warping the fog housing by baking. The lens itself will begin to demold long before the housing is at risk. The sidemarker lens should just be cut out and the lens can by installed in 1 step.

[SvB4EvA]

I want a set of smoked side markers, diffused. Are they available?