Cadillac Owners Forum banner

2006 (3.6) Hub replacement question

677 views 3 replies 3 participants last post by  mattt0305 
#1 ·
Hi all,
The sensor wires on my right rear wheel broke flush from the back of the hub. And there's no chance of even soldering the wires back on because there's nothing there; it's flush with that wax-looking seal . I've decided to replace the hub myself but I just went to RockAuto and they literally have 18 Hubs listed ranging in price from $44 bucks to $205. This seems like a ridiculous quantity to chose from and really skews my judgement on what to buy.

Which is the good hub for the CTS 3.6? I don't need the best of the best because my wife drives her car rather gently...no abuse what so ever. Also, are the hub bolts really being replaced too because I've read they shouldn't be reused?

Thanks in advance for the suggestions.
Any links would be appreciated as well
 
#2 ·
Stick with Timken or SKF, should run around $100...The hub comes with new lugs attached, you'll reuse the 3 bolts used to hold the hub in place.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top