- 07-04-13 01:33 AM #1Cadillac Owners Member
- Automobile(s): 2004 CTS 3.6 V6, AFE CAI, CTS-V grill,
- Join Date
- Oct 2011
Oil changed still 0% and Change Oil Soon
So I just did an oil change on my 2004 CTS. I got the message Change Oil Soon right before I did the job. I did the job no hiccups and now I can't get the message to go away, nor can I get the life % to reset.
I have a NAV unit and I have tried the info Engine Oil Life holding the reset button down method, but no dice. It goes to XXX% for a few moments but then back to 0%, and the change oil soon continues to show up on the NAV on start up and occasionally during a drive
The oil was filled with 5W-30 SAE and I replaced a mobile one filter.
Any advice would be greatly appreciated, it is more of an inconvenience than a serious issue as I know the oil is clean.
- 07-04-13 07:20 AM #2
Hold the reset till xxx is replace by 100%
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - SAE Hex Bits Set
SAE Hex Bits Set - 7 Piece; 3/8" Drive; SAE Hex Bits; Contains: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16" & 3/8"
- PowerTorque Tools - Air Tool Kit
Air Tool Kit - 17 PieceMore on PowerTorque Tools - Air Tool Kit
- PowerTorque Tools - Adjustable Wrench
Adjustable Wrench - 8 Inch