This is thanks to user Far East.
REMOVAL PROCEDURE
TOOLS REQUIRED
J 38778 Door Trim Pad Clip Remover
Image 1
l . Apply several layers of masking tape (1) to the top of the outside rearview mirror housing in order to protect the painted finish.
2. Push the mirror face (2) inward at the bottom of the face until full travel is reached.
Image 2
3. Remove the mirror face.
3.1. Retain pressure on the bottom of the mirror face.
3.2. Insert a J 38778 or the equivalent behind the glass and the first
support rib.
3.3. Pry outward until the mirror face is released.
Image 3
4. Disconnect the electrical connectors


