Cadillac Catera and Cimarron Forum Discussion, set the cams in Past Cadillac Vehicle Discussion; I replaced the head gasket on my 1998 Catera, now it is giving me two codes, cam and crank, I ...
- 09-04-13 03:50 PM #1Cadillac Owners Member
- Automobile(s): catera
- Join Date
- Jul 2013
set the cams
I replaced the head gasket on my 1998 Catera, now it is giving me two codes, cam and crank, I can't seem to understand if i got the timing wrong or not. What could be the problem. Is the timing wrong. The car runs but purely, engine light with codes. It drive and don't cut off, just runs bad. Can some one tell me what I did wrong?
- 09-04-13 07:52 PM #2Cadillac Owners Enthusiast
- Automobile(s): Cadillac
- Join Date
- Jul 2008
Re: set the cams
I am impressed that you were able to do that. Obviously something is "off."
- 09-05-13 10:30 AM #3
Sounds like the timing is off. I had to go back into the 99.had the marks off just a little.
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - Universal Joint Set
Universal Joint Set - 3 Piece; 1/4 Inch, 3/8 Inch, 1/2 Inch
- PowerTorque Tools - Pliers
Pliers - 5 Inch; LockMore on PowerTorque Tools - Pliers
- PowerTorque Tools - Long Arm Hex Key SAE
Long Arm Hex Key SAE - 13 Pcs SAE Long Arm Hex Key Set; With Storage Container