| Re: No instrument panel Lights Just to verufy, you are talking about the bulbs that provide the general illumination of the instrument cluster, correct? If so, do the radio and console switch lamps light? And do they dim properly using the dimmer on the headlight switch? If so, and assuming that all of the light bulbs in the cluster are indeed good, you need to verify that voltage is present on pin 17 of the instrument cluster connector. The voltage should vary with the setting of the dimmer. If voltage is present, then you need to tear the instrument cluster apart and look for a break in the PC board between Pin 17 and the light bulbs. FWIW, the BCM has nothing to do with these lamps. I am curious as to why it was replaced. Or am I missing something? |