Anyone have a good picture..

WGoins88 · #1 (**permalink**) 08-30-09, 10:13 AM

....of a Catera engine? I am going to reassemble mine soon once I do the oil cooler, and I am sure I am missing a few parts. I will need a picture of a completely assembled engine, in high resolution possible so I can point out what I need so I can post in the wanted section.

Thanks!

R-Caddy · #2 (**permalink**) 08-30-09, 05:27 PM

Do you mean shortblock, longblock, accessories, complete motor with acc. and all the lines...?

WGoins88 · #3 (**permalink**) 08-30-09, 08:11 PM

Complete, in car. I have a few vacuum lines I am missing and a few pieces I believe. Probably a shot on each side of the engine compartment and a pic of the components behind the radiator like the diverter valve and such.

WGoins88 · #4 (**permalink**) 08-30-09, 08:14 PM

Complete and in the car. I need pics of both sides of the engine, behind the plenum and the area with the diverter valve behind the radiator. Like I said I know I am missing a few things that I will need either from the junkyard or if someone on here has parts.

R-Caddy · #5 (**permalink**) 08-30-09, 10:00 PM

Here's some stuff for starters
http://www.omegaowners.com/forum/YaB...565204#top#top
and

hope this helps a bit

elvin315 · #6 (**permalink**) 08-30-09, 10:53 PM

I have a few thousand:

http://www.pbase.com/elvin315/the_catera

WGoins88 · #7 (**permalink**) 08-31-09, 11:00 AM

Ahh excellent. It seems I am missing a few things. I know for sure it's the 2 thin vacuum lines that run up to the multiram, the cover for the wire harness that runs across the timing cover, and a couple clamps. I do know that I need one of those 4 hose things that go into the black piece on the upper plenum, mine had 2 cracked hoses.