- 04-14-13 10:39 PM #1
Ccp fuse for remote wire hookup ?
I have been reading and when installing an aftermarket amp alot of people say tap in to the ccp fuse with a fuse tap like this
now my questions is does the a/c need to be on for it to turn the amp on and does the car need to be running for it to work ? thanks
And I should get a 2 channel line output converter and hook the two negatives(from the converter) to the negative on the factory sub wire and the two positives to the positive on factory sub right?
- 07-25-13 04:16 PM #2Cadillac Owners Member
- Automobile(s): 2007 CTS 2.8L Non-Bose
- Join Date
- Jul 2013
Re: Ccp fuse for remote wire hookup ?
I am in the same situation with my 2007 CTS 2.8L Non-Bose. I tapped into the CCP fuse with one of those fuse taps. I has come on twice but stops after I turn the car off. I suspect the power wire from the battery terminal to the engine fuse is corroded (from a old system). If it isn't that, then I am moving the remote wire to a different location other than the CCP fuse.
ACDelco - Garage Jack
Garage Jack - Heavy Duty; Maximum Capacity: 3-1/2 Ton (7,000 Lbs.); Lift Range: 4-1/2 - 21 Inch; Handle Length: 49 Inch; Base Dimension: 28-3/4 x 14-1/2 InchMore on ACDelco - Garage JackPrice: 169.99 USD
Super Start - Booster Cables
Booster Cables - Copper Clad Aluminum; 6 Gauge; 16 Foot Length; Orange/BlackMore on Super Start - Booster CablesPrice: 27.99 USD
PowerTorque Tools - Speeder Handle
Speeder Handle - 3/8 Inch Drive; 16 InchPrice: 6.99 USD