Cadillac Audio, Video and Security Systems Discussion, 96 DeVille Concours tweeter installation in Item Specific Cadillac Discussion; Hey all, yeah I know I'm new here you don't have to rub it in :P . I'm in the ...
- 09-07-10 10:18 PM #1
96 DeVille Concours tweeter installation
Hey all, yeah I know I'm new here you don't have to rub it in :P . I'm in the process of replacing all the speakers in the car (11 speaker non-Bose) and I've run into a problem. The adapters for the tweeters (Rockford Fosgate 152s) Crutchfield provided don't fit on the factory tweeter socket so I'm going to have to wire them manually. Thing is, I don't know which wire running to the stock ones are positive and which ones are negative, or if it will even work for that matter since there seems to be a big capacitor of sorts on the stock tweeter. Any help would be appreciated, I know people have done this before and since I'm only eighteen I don't know too much about this stuff.
- 09-08-10 09:54 AM #2
Re: 96 DeVille Concours tweeter installation
Just to clarify, I did search the forum before posting and I looked at previous posters wiring guides and although this was helpful for installing the rear speakers the guide does not make mention of tweeter wires.
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - Metric Hex Bits Set
Metric Hex Bits Set - 7 Piece; 3/8" Drive; Metric; Metric Hex Bits; Contains: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm & 10mm
- PowerTorque Tools - Universal Joint Set
Universal Joint Set - 3 Piece; 1/4 Inch, 3/8 Inch, 1/2 Inch
- PowerTorque Tools - Ratchet Wrench Set
Ratchet Wrench Set - 7 Piece; SAE