Cadillac Audio, Video and Security Systems Discussion, Tapping into Chime channel on BOSE headunit 98 ETC in Item Specific Cadillac Discussion; So I am looking at eSI (FSM) and I see that there are two pins in the harness devoted to ...
- 03-24-08 10:14 AM #1
Tapping into Chime channel on BOSE headunit 98 ETC
So I am looking at eSI (FSM) and I see that there are two pins in the harness devoted to the chime:
Chime Module Signal - Bit 2 (with UQ4 or UQ6)
Chime Module Signal - Bit 1 (with UQ4 or UQ6)
I would like to tap into it so that my GPS/radar detector can be heard over the radio/stereo.
Which one do I tap into?? Bit 1 or Bit 2?
The reason I want to do this is so that I don't have to change inputs. I want to be listening to the radio, or with the radio off, and hear my GPS directions/bluetooth cell call.
Any help will be appreciated!!!
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - SAE Hex Bits Set
SAE Hex Bits Set - 7 Piece; 3/8" Drive; SAE Hex Bits; Contains: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16" & 3/8"
- PowerTorque Tools - SAE & Metric Socket Set
SAE & Metric Socket Set - 41 Piece; 1/4" & 3/8" Drive
- PowerTorque Tools - Ratchet Handle & Socket Set
Ratchet Handle & Socket Set - 14 Piece; 1/4" Drive Ratchet Handle & Metric Socket Set