Cadillac Owners Forum banner

Please post your aftermarket (or refinished) wheels on your ATS

910K views 1K replies 239 participants last post by  AAIIIC 
#1 ·
Lets create a thread where everyone can show off their wheels and help others decide on what they want to do on their cars
Please pot pictures of your car or other car you have seen and add specs in this format
Thanks

Wheel Brand :
Model :
Size :
Offset:
Bolt Pattern:
Tires :

Here are a couple of example


Wheel Brand : TSW
Model : Interlagos
Size : 19x8 F and 19x9.5 R
Offset: ET35 F and ET41 R
Bolt Pattern: 5x114.3
Tires : 235/35/19F and 265/30/19R


Wheel Brand : TSW
Model : Jerez
Size : 18x8
Offset: ET35
Bolt Pattern: 5x114.3
Tires : 225/40/18

 
See less See more
3
#327 · (Edited)
Camorri1 said:
Definitely not cheap... http://www.vertiniwheels.com/images/wheels/magic/magic-matte%20black.htm A lot of people probably won't like the concave look. I personally (obviously) do. I'm not a fan of the deep rim that others like. I'm still trying to figure out if the bolt pattern will actually work on the ATS, it might be a no go.
Nice! I like the stainless also. They look like they could be a chore to clean though. Prices are not too bad for forged wheels. I wonder if any one has thought to put 19s in the rear and 18s up front. The ride would not be as bad, I would think anyway. Anyone think that this would confuse the MRC system?
 
#331 ·
JoeC1982 said:
D3 posted this earlier
Anyone know what size the wheels are on the white caddy? I have been emailing AG wheels and I found out I could order custom size, bolt pattern and offset. They also have a F410 model wheel that I really like but a little out of my price range. Also does anyone know the correct offset for a flush look back and front for 19s?
 
#339 ·
#340 ·
Re: Please post your aftermarket wheels on your ATS

Well, I have been on a mission for the past couple weeks now looking for the perfect rim and have spent hours online and talking to wheel shops. I couldn't find one single rim that fit my needs of 18", gunmetal, and had the look I wanted in the proper 5x115. So I have decided to order the TSW Interlagos (the look I wanted) and will have them professionally drilled and then powdercoated in gunmetal to go on my black car.
 
#341 ·
Re: Please post your aftermarket wheels on your ATS

How much is that going to run you?
Well, I have been on a mission for the past couple weeks now looking for the perfect rim and have spent hours online and talking to wheel shops. I couldn't find one single rim that fit my needs of 18", gunmetal, and had the look I wanted in the proper 5x115. So I have decided to order the TSW Interlagos (the look I wanted) and will have them professionally drilled and then powdercoated in gunmetal to go on my black car.
----------

Yeah I wouldn't drop that either. That looks good just like that.
yeah if my car looked like that i wouldnt drop it at all.


----------

i am tempted to try these.
http://www.elementwheels.com/proddetail.asp?prod=xomiami2085mblkmachxomiami2010mblkmach

----------

does anyone remember the tire sizes KPE was using on their blue ats show car?
 
#354 ·
Re: Please post your aftermarket wheels on your ATS

OK, I think I have enough of base painted 17" rims! I am considering a set of 18" rims with high performance tires. Right now I am thinking about the color. I can go silver, black, or black with silver/white around. Please let me know what you think:

Silver:


Black:


Black with silver/white around:


I am leaning towards silver! Black with silver edge is the second, and black is the last.
 
#358 ·
Re: Please post your aftermarket wheels on your ATS

You guys are using your stock run flat tires with these aftermarket rims, or buy new high performance regular tires? Any feedback on that? I am going to buy regular tires for my aftermarket wheels.
I would definitely buy performance tires and probably non run-flats. I would like to drive an ATS without run-flats first just to see how the softer sidewalls effect the handling but I wouldn't expect some minimal increased roll to come close to negating the benefit of the extra grip. The factory non-performance tires really hurt the cornering Gs and braking of the car and I'm sure contribute to the tire spin at low speeds with a tune. This was my hardest decision between a Performance and a Premium. I didn't care about the MRC but wanted the performance tires but absolutely did not want the staggered wheels for a daily driver. One dealer said they would do a swap but I did not trust them to even have any to swap when my car arrived and the dealer I went with said no way. So I'm doing what I can to wear the factory tires out as soon as possible. ;)
 
#365 ·
dvsadversary said:
Vossen doesn't make 20" wheels (or any other size) that fit the Ats. That's what they told me. So these were drilled to 5x115.. And the center bores were small so they had to be cut on a CNC machine.. The guys at Exclusive Motors in Miami know their shit. And my Ats was the first they had put this set up on. I am incredibly impressed. The car drives beautiful. No type of vibration at any speed. And I'm pretty sure the backs are et55. If you zoom in on the picture you might notice how much the lug nuts stick out.. Not that much material there.. :thumbsup: <img src="http://www.cadillacforums.com/forums/attachment.php?attachmentid=182321"/>
Same as KPE car, u get the drilled
 
#367 ·
Re: Please post your aftermarket wheels on your ATS

Just ordered the new Konig Oversteer in Opal finish to replace the TSW Nurburgrings that are still available. Same size and offset as my TSW, should look good i think. I also have the Caddy remote start kit if somebody wants one too.
 
#375 ·
So stupid question...please don't judge.

Will a 114.3/5 bolt patter fit on the ATS? I believe the ATS is 115/5 with a +42 mm offset. And if it does, how do I know what offset to get or does that depend on the size? I ask because I'm looking at 19 x 8.5 to replace my 18 x 8 polish GM wheels. Thanks for the help.
 
#376 ·
Re: Please post your aftermarket wheels on your ATS



19x8.5 will fit in either 115/5 or 114.3/5. 115/5 is whats on your car stock, but 114.3 fits on 115. its more snug but it works. in 19x8.5 your looking for 35-45 mm of offset. plenty of good wheels in those ranges. do you have any thoughts as to the ones your interested in?
 
#377 ·
greezychef said:
19x8.5 will fit in either 115/5 or 114.3/5. 115/5 is whats on your car stock, but 114.3 fits on 115. its more snug but it works. in 19x8.5 your looking for 35-45 mm of offset. plenty of good wheels in those ranges. do you have any thoughts as to the ones your interested in?
Thanks Greezy,

I think I mentioned in another post that we are interested in similar wheels. I like the Vertini Magic. But of course they only make bolt pattern 114.3. I've read here and there that it is unsafe to put 114 on 115 cuz it causes extra, unnecessary stress, but also have heard that it won't hurt anything. Just was wondering what the thoughts were.
 
Top