Please post your aftermarket (or refinished) wheels on your ATS - Page 2
cadillac ats forums cadillac ats forums
CadillacForums.com is the premier Cadillac Forum on the internet. Registered Users do not see the above ads.
+ Reply to Thread
Page 2 of 54 FirstFirst 1 2 3 4 5 6 7 8 9 10 11 12 52 ... LastLast
Results 16 to 30 of 808
Like Tree179Likes
Cadillac ATS Picture Forum Discussion, Please post your aftermarket (or refinished) wheels on your ATS in Cadillac ATS Discussion Forums; Originally Posted by Jakb Ok Thanks So basically you're running 19x9 ET34 up front with a 255/35/18 tire (which is ...
  1. #16
    mikesul is offline Cadillac Owners Enthusiast
    Automobile(s): '13 ATS 2.0T manual Thunder Gray
    Join Date
    Aug 2010
    Posts
    685

    Re: Please post your aftermarket wheels on your ATS

    Quote Originally Posted by Jakb View Post
    Ok Thanks

    So basically you're running 19x9 ET34 up front with a 255/35/18 tire (which is stock height) that's interesting and in line with what E90's could run up front with a similar stock size setup

    Do you feel you would have enough clearance to drop 1.5" or would it be too tight ?
    18"x9" all around w/40 mm offset.

  2. #17
    greezychef is offline Cadillac Owners Fanatic
    Automobile(s): 2013 ATS 2.0T 6 speed manual
    Join Date
    Sep 2013
    Posts
    239

    Re: Please post your aftermarket wheels on your ATS

    would vossen cv3's 20x9 offset 38 and 20x10 offset 45 fit?

  3. #18
    Jakb is offline Cadillac Owners Fanatic
    Join Date
    Oct 2013
    Posts
    155

    Re: Please post your aftermarket wheels on your ATS

    Quote Originally Posted by mikesul View Post
    18"x9" all around w/40 mm offset.
    Didn't you say you where using 6mm spacers up front? that would lower offset to ET34

  4. #19
    JoeC1982 is offline Cadillac Owners Fanatic
    Automobile(s): 2013 ATS 2.0T
    Join Date
    Oct 2013
    Age
    32
    Posts
    196

    Re: Please post your aftermarket wheels on your ATS

    1391527_600759063294136_632841716_n.jpg
    Modulare forged wheels on a D3 car for SEMA. Trying to get info on sizes.

    Those Konig Torch look good on the photoshop, is anybody planning on the BBS SR? I'm thinking of doing a black/gunmetal theme but don't want to get them if a lot of people are getting the same ones. They look pretty good on this BMW i think.10313090613_7418dc96e7_b.jpg
    Gomaz likes this.

  5. #20
    turbo_ats's Avatar
    turbo_ats is offline Cadillac Owners Member
    Automobile(s): 2014 ATS 2.0T 6-speed
    Join Date
    Oct 2013
    Location
    Calgary, Alberta
    Posts
    32

    Re: Please post your aftermarket wheels on your ATS

    Wheel Brand : Niche
    Model : Milan M137
    Size : 20
    Tires : 245/30/R20
    photo 2.JPGphoto 3.JPG
    Gomaz, mong8se and Philly82 like this.

  6. #21
    duneless is offline Cadillac Owners Enthusiast
    Automobile(s): black raven 2013 ats4 3.6
    Join Date
    Jul 2013
    Location
    connecticut
    Age
    40
    Posts
    838

    Re: Please post your aftermarket wheels on your ATS

    [Seems like it would fit. 20 by 10 my stick out some. I would think. Even with a 45 offset. Not sure.QUOTE=greezychef;11245954]would vossen cv3's 20x9 offset 38 and 20x10 offset 45 fit?[/QUOTE]

  7. #22
    JLGT is offline Cadillac Owners Fanatic
    Automobile(s): 13 ATS 2.0T 6MT Performance
    Join Date
    Sep 2013
    Posts
    167

    Re: Please post your aftermarket wheels on your ATS

    Quote Originally Posted by greezychef View Post
    would vossen cv3's 20x9 offset 38 and 20x10 offset 45 fit?
    Assuming you have factory 18x8 42et.

    20x9 38et
    9mm less inner clearance.
    Outer edge will be 17mm further out.

    20x10 45et
    28mm less inner clearance.
    Outer edge will be 22mm further out.

  8. #23
    Stevo Supremo's Avatar
    Stevo Supremo is offline Cadillac Owners Connoisseur
    Automobile(s): ATS RWD 2.0 Manual
    Join Date
    Feb 2013
    Posts
    1,347

    Re: Please post your aftermarket wheels on your ATS

    [QUOTE=JoeC1982;11246882]Attachment 157570
    Modulare forged wheels on a D3 car for SEMA. Trying to get info on sizes.


  9. #24
    duneless is offline Cadillac Owners Enthusiast
    Automobile(s): black raven 2013 ats4 3.6
    Join Date
    Jul 2013
    Location
    connecticut
    Age
    40
    Posts
    838

    Re: Please post your aftermarket wheels on your ATS

    Those look hot. But at this point with the gap D3 keeps showing on their cars any rim looks good. Right now if you had steelie rims with that gap it would look hot to all of us. I can't pay all that for the coilover set up.[QUOTE=Stevo Supremo;11251010]
    Quote Originally Posted by JoeC1982 View Post
    Attachment 157570
    Modulare forged wheels on a D3 car for SEMA. Trying to get info on sizes.



    ----------

    Those rear tires look stretched to allow more drop. The rim is more exposed with not much tire at the edge of the rim. The rear rims stick out as far as mine but my tires aren't stretched. I like the offset combo of that car. I won't be able to do that with mine with all wheel drive I was told. That combo is a good look though. Staggered will mess the car up in the long run.[QUOTE=Stevo Supremo;11251010]
    Quote Originally Posted by JoeC1982 View Post
    Attachment 157570
    Modulare forged wheels on a D3 car for SEMA. Trying to get info on sizes.


  10. #25
    duneless is offline Cadillac Owners Enthusiast
    Automobile(s): black raven 2013 ats4 3.6
    Join Date
    Jul 2013
    Location
    connecticut
    Age
    40
    Posts
    838

    Re: Please post your aftermarket wheels on your ATS

    copper8.JPGcopper 3.JPG

    For reference because some people here don't like my rims. Ill post so you can get some Ideas.
    245/35/20 tires
    offset unknown, I thought they were +40 don't think so now.
    8.5 GW105 rims copper plated 10 years or so later.

  11. #26
    greezychef is offline Cadillac Owners Fanatic
    Automobile(s): 2013 ATS 2.0T 6 speed manual
    Join Date
    Sep 2013
    Posts
    239

    Re: Please post your aftermarket wheels on your ATS

    i doubt they are 40.

    you dont rub?

    I really want the vossens or possibly the XO Miami's. but Im uncertain if they will fit. I have also found the ace alloy Mesh 7's that will fit our cars in a 20x8.5 et 40. should be nice and flush. If i did the ace alloys I would probably go for a square fitment. which would be better financially, but yall dont even understand how bad i want them staggered Vossens

    mesh 7's:http://www.acealloywheel.com/mesh7-w...RZ_1_1073.html
    cv3's:http://www.vossenwheels.com/wheels/VVSCV3.aspx
    xo miami's:http://www.xowheels.com/wheels/Miami

  12. #27
    duneless is offline Cadillac Owners Enthusiast
    Automobile(s): black raven 2013 ats4 3.6
    Join Date
    Jul 2013
    Location
    connecticut
    Age
    40
    Posts
    838

    Re: Please post your aftermarket wheels on your ATS

    No rub.And car rides smooth. Not even over speed bumps will it bottom out on the fenders. Tracks real well down the highway also.QUOTE=greezychef;11257810]i doubt they are 40.

    you dont rub?

    I really want the vossens or possibly the XO Miami's. but Im uncertain if they will fit. I have also found the ace alloy Mesh 7's that will fit our cars in a 20x8.5 et 40. should be nice and flush. If i did the ace alloys I would probably go for a square fitment. which would be better financially, but yall dont even understand how bad i want them staggered Vossens

    mesh 7's:http://www.acealloywheel.com/mesh7-w...RZ_1_1073.html
    cv3's:http://www.vossenwheels.com/wheels/VVSCV3.aspx
    xo miami's:http://www.xowheels.com/wheels/Miami[/QUOTE]

    ----------

    Wait i don't see any jail time infractions on your profile like on mine. That's ok wouldn't be the first time things have been on my record.
    Quote Originally Posted by greezychef View Post
    i doubt they are 40.

    you dont rub?

    I really want the vossens or possibly the XO Miami's. but Im uncertain if they will fit. I have also found the ace alloy Mesh 7's that will fit our cars in a 20x8.5 et 40. should be nice and flush. If i did the ace alloys I would probably go for a square fitment. which would be better financially, but yall dont even understand how bad i want them staggered Vossens

    mesh 7's:http://www.acealloywheel.com/mesh7-w...RZ_1_1073.html
    cv3's:http://www.vossenwheels.com/wheels/VVSCV3.aspx
    xo miami's:http://www.xowheels.com/wheels/Miami

  13. #28
    FluxTZ is offline Cadillac Owners Member
    Join Date
    Mar 2013
    Posts
    82

    Re: Please post your aftermarket wheels on your ATS

    If you can realistically fit a 20" wheel on this car without it looking ridiculous then I would take either the Vossen CV4 or new Vossen CVT in a heartbeat. Also came across the Motiv 407CB which I like a lot too. Obsessed with the new Jaguar XFR-S wheel also.

    Thoughts?

    Vossen CV4


    Vossen CVT


    Motiv 407CB


    Jaguar Varuna

  14. #29
    Jerzeyboy730's Avatar
    Jerzeyboy730 is offline Cadillac Owners Fanatic
    Automobile(s): ATS 2.0T
    Join Date
    Sep 2013
    Location
    South Jersey
    Age
    35
    Posts
    121

    Re: Please post your aftermarket wheels on your ATS

    10" sitting flush will need coil overs, you can get away with 9.5's w265/30, but anything wider will have to stick out....pretty sure black d3 with rays is on 10's in rear lowered/coil overs, wouldn't fit without coils

  15. #30
    JoeC1982 is offline Cadillac Owners Fanatic
    Automobile(s): 2013 ATS 2.0T
    Join Date
    Oct 2013
    Age
    32
    Posts
    196

    Re: Please post your aftermarket wheels on your ATS

    I'm having a terrible time picking wheels out, like the TSW Interlagos and Nurburgring but i know they won't look as good in 18" as the 19's on the D3 car.
    These new Niche Essen's are nice, 19" is smallest and they only have 20's and 21's in stock right now. In some of the pics they have more concave and look better but i figure this is what the 19x8.5 would look like, not sure if i want to do a 19x10 rear.
    Esscen_silver_20x9_A2_700.png

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.
If you do not want to register, fill this field only and the name will be used as user name for your post.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Bookmarks

Cadillac Posting Rules

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
Read about Lincoln | Buick | Kia Forte Forum
Need products for your Cadillac? Check out your options at the links below:

custom floor mats | Cadillac Chrome and Black Chrome Wheels | window tinting