Anyone installed an aftermarket system in their ATS?
I am toying with the idea of putting a 12" JL TW3 in the storage area below the floor in the trunk. In order to do this, I'll need to run an amp off of the sub channel of the factory system. This is where I am curious if anyone else has had any luck running a hi/lo converter off of the factory system. I am worried about the noise canceling portion of the system and how it will affect an aftermarket system.
Re: Anyone installed an aftermarket system in their ATS?
Yes I just did. Everything in the trunk. The factory amp has 3 plugs.. the bottom plus has Green/black and Blue/gray wires... those go to the factory 10inch sub and I tapped into them for my signal. Power and ground are obvious on the left side from the battery. Only thing is... I'm looking for a remote signal or Key on 12v!!! I just ghetto rigged it now so I wire them together when I want to hear it. Lol