Cadillac Allante Forum Discussion, Body Side Molding in Past Cadillac Vehicle Discussion; I would like to replace the body side molding on my Allante. Is anyone aware of a source for 1/2" ...
- 05-15-06 02:11 PM #1
Body Side Molding
I would like to replace the body side molding on my Allante. Is anyone aware of a source for 1/2" half round body side molding?
- 05-15-06 06:09 PM #2Cadillac Owners Fanatic
- Automobile(s): 1992 Tripple Black Allante, RIP 98 catera
- Join Date
- Mar 2004
Re: Body Side MoldingOriginally Posted by jackl1956
- 05-22-06 04:31 AM #3
Re: Body Side Molding
I did it myself a few years ago. Removal of the old stuff was easy egnough, but the glue was a bear to get off. I bought new molding at Pep Boys and it looks fine after three years. I used the crome strips and it looked better than the original.
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - Ratchet
Ratchet - 3/8 Inch Drive; Round Head; Quick ReleaseMore on PowerTorque Tools - Ratchet
- Tub O' Towels - Solution Soaked Scrubbing Towels
Solution Soaked Scrubbing Towels - Each Towel Is 10 X 12 Inches; 90 Count
- Meguiar's - Plastic Restorer
Plastic Restorer - Ultimate Black; Restores Black Trim; 12 Oz.More on Meguiar's - Plastic Restorer