| Cylinder leak-down test procedure (with percentage gauge)
I've got a little smoke on start-up and before doing the anticipated valve stem seals, I wanted to be sure I didn't have any other problems.
Well I bought an engine leak-down test kit (with poorly translated instructions) but haven't been successful using it.
Do any of you know how to test using a setup like the one in the picture?
The left gauge show PSI and the right shows percentage loss. While it sounds easy enough, I'll be darned if I can find the right procedure anywhere (and I've looked).
So far, my engine is either perfect or totally pooched <grin> |